STM1-S_SDV_Maintenance(Eng_Ver1).pdf - 第52页

Mon thly Inspe ction Chap ter 5 Multi -Func tional Placer ST M1-S M ain ten an ce Ha nd bo ok 5-1 Cleaning the Head Spindle T ool for M aintenanc e Cloth, air gun Measures Step 1. Move t he X Fra me to fr ont by r efer r…

Weekly Inspection

Chapter 4

Multi-Functional Placer

STM1-S Maintenance Handbook

4-8

Replace the Detach vacuum ejector filter

Weekly Inspection

Step 4.

Push a lock button of the filter module, and separate the

filter module.

Step 5.

Rotate a port part of the filter module, and detach the

filter.

Step 6.

Replace the filter with a new one.

Monthly Inspection

Chapter 5

Multi-Functional Placer

STM1-S Maintenance Handbook

5-1

Cleaning the Head Spindle

Tool for Maintenance

Cloth, air gun

Measures

Step 1.

Move the X Frame to front by referring to "Forward

movement of the X-frame" on page 1-3.

Step 2.

Press the 'STOP' and 'RESET' buttons in order after

pressing the 'EMG' button on the OP panel to stop

operation.

For more details, refer to "How to perform emergency stop" on page

1-2.

Step 3.

Remove the tube from the Vacuum Filter

Caution

Check the assembled state of the Vacuum Filter inspection or after

the exchange after the Filter and the Tube.

Step 4.

Remove the nozzle

Cleaning the Head Spindle

(Time required: 30min / No. M-1)

Chapter 5

Monthly Inspection

Chapter 5

Multi-Functional Placer

STM1-S Maintenance Handbook

5-2

Cleaning the Head Spindle

Monthly Inspection

Step 5.

Put the cloth underneath the spindle

Step 6.

Cleaning the interior of the tube by an air gun.

Caution

Using the air gun without putting on goggles may cause injury to

operator's eyes. Be sure to wear goggles when using the air gun.

Step 7.

Release the emergency stop as described in "Releasing

'Emergency Stop' mode" on page 1-6 and perform the

operation again.