STM1-S_SDV_Maintenance(Eng_Ver1).pdf - 第67页
Mon thly Inspe ction Chap ter 5 Multi -Func tional Placer ST M1-S M ain ten an ce Ha nd bo ok 5-1 6 Cleaning the Ionizer Nozzle T ool for M aintenanc e Air spray , cotton swab Measures Step 1. Pre ss th e 'STO P&apo…
Monthly Inspection
Chapter 5
Multi-Functional Placer
STM1-S Maintenance Handbook
5-15
Cleaning and Lubricating the Y Frame Ball screw
Monthly Inspection
Step 5.
Move the X frames back and forth three times.
Step 6.
Release the emergency stop as described in "Releasing
'Emergency Stop' mode" on page 1-6 and perform the
operation again.
Monthly Inspection
Chapter 5
Multi-Functional Placer
STM1-S Maintenance Handbook
5-16
Cleaning the Ionizer Nozzle
Tool for Maintenance
Air spray, cotton swab
Measures
Step 1.
Press the 'STOP' and 'RESET' buttons in order after
pressing the 'EMG' button on the OP panel to stop
operation.
For more details, refer to "How to perform emergency stop" on page
1-2.
Step 2.
Turn off the power supply to the machine
For more details, refer to "How to turn off the power supply" on
page 1-1.
Caution
If the power supply is not cut off, an electric shock may occur due
to the high voltage of the ionizer.
Step 3.
Remove foreign materials in the Ionizer Nozzle using a
cotton swab.
Cleaning the Ionizer Nozzle
(Time required: 10min / No. M-9)
Monthly Inspection
Chapter 5
Multi-Functional Placer
STM1-S Maintenance Handbook
5-17
Cleaning the Ionizer Nozzle
Monthly Inspection
Step 4.
Clean the Ionizer Nozzle using an air sprayer.
Caution
Exercise care to prevent injury from the discharge needle inside the
ionizer nozzle when performing maintenance.