STM1-S_SDV_Maintenance(Eng_Ver1).pdf - 第35页
ST M1-S M ain ten an ce Ha nd bo ok 3-6 Chap ter 3 Daily Inspe ction Multi -Func tional Placer Cleaning feeder and feeder base Daily Inspection Step 7 . Ins tall th e fee der ① Fixing the feeder in the slot ② Fixing the …
STM1-S Maintenance Handbook
3-5
Chapter 3
Daily Inspection
Multi-Functional Placer
Cleaning feeder and feeder base
Step 4.
Clean the feeder connector and the installation guide
using a brush.
Step 5.
Check visually for any foreign materials in the feeder
base slot and connector.
Caution
In case the feeder is installed on the feeder base without visually
checking and cleaning the feeder base upper surface and feeder
slot, the feeder could not be installed and removed smoothly.
Caution
When the feeder is felt stuck during the installation of the feeder
unlike normal feeling, do not apply excessive force to the feeder.
After removing the feeder, Check it visually and clean it if necessary.
Step 6.
Clean the feeder base slot and connector using a flat
brush.
STM1-S Maintenance Handbook
3-6
Chapter 3
Daily Inspection
Multi-Functional Placer
Cleaning feeder and feeder base
Daily Inspection
Step 7.
Install the feeder
① Fixing the feeder in the slot
② Fixing the grip
If it is properly installed, the LED color turns green.
STM1-S Maintenance Handbook
3-7
Chapter 3
Daily Inspection
Multi-Functional Placer
Checking and replacing the air filter
Clean the dust from the air to prevent machine failure due to foreign materials when
using pneumatic air.
Measures
Step 1.
Press the 'STOP' and 'RESET' buttons in order after
pressing the 'EMG' button on the OP panel to stop
operation.
For more details, refer to "How to perform emergency stop" on page
1-2.
Step 2.
Shut the main pneumatic pressure supplied to the
machine.
Step 3.
Press down on the air filter container lock button.
Caution
Failure to shut off pneumatic pressure when replacing the air filter
or mist separator filter may result in personal injury. Shut off the
pneumatic line before replacing any of these parts.
Air Filter is
discolored.
Checking and replacing the air filter
(Time required: 30min / No. D-3)