00195044-22_UM_VisionTeachStation_5.x.x_DE_EN.pdf - 第140页

5 Installing the cameras Vision Teach Station 5.x.x User Manual 5.3 Installing the type 23 head camera 05/2019 Edition 48

Vision Teach Station 5.x.x User Manual 5 Installing the cameras

05/2019 Edition 5.3 Installing the type 23 head camera

(5) Component support, camera type 23

(6) Pillar

(7) Connection for cable, head camera 1 (03040353-W1: 26-pin, 03040353-W2: 12-pin)

(8) Connection for cable, head camera 2 (03040353-W1: 26-pin, 03040353-W2: 12-pin)

(9) Connection for camera bus cable to the PC (03040359-xx)

(10) Connection for CAN bus cable to the PC (03040362-xx)

 Release the lock on the positioning unit (item 2 in Fig. 5.3 - 12, page 46) using the magnetic

switch (item 1 in Fig. 5.3 - 12

, page 46)

 Push the positioning unit out.

 Fix the component support (item 5 in Fig. 5.3 - 12, page 46) using the two hexagon socket head

screws M3 x 10 (item 4 in Fig. 5.3 - 12

, page 46) to the holder (item 3 in Fig.

5.3 - 12

, page 46).

 Push the positioning unit (item 2 in Fig. 5.3 - 12, page 46) back towards the pillar (item 6 in Fig.

5.3 - 12

, page 46) and lock the positioning unit in place.

WARNING 5

Always make sure that the base module and PC are switched off when you connect or re-

move connectors.

NEVER unplug the 26-pin ribbon cable while it is carrying voltage as this could damage the

LED driver board for the camera. 5

5.3.5 Connecting the adapter, base module and PC

Run the cables as described in section 5.2.5, page 43.

5 Installing the cameras Vision Teach Station 5.x.x User Manual

5.3 Installing the type 23 head camera 05/2019 Edition

Vision Teach Station 5.x.x User Manual 6 2nd camera option

05/2019 Edition 6.1 Vision teach station upgrade

6 2nd camera option

You can install a second camera on the vision teach station as an option. We can provide the

upgrade package you will need. This package does NOT include the camera and assembly kit,

however, which should be ordered separately.

6.1 Vision teach station upgrade

6.1.1 Bill of materials

6.1.2 Component camera

You will find the order data for the component cameras in section 3.2, page 15.

6.1.3 Assembly

When the vision teach station is converted to two cameras, the pillar and the component positio-

ning table are moved from the middle to the left (see Fig. 6.1 - 1

, page 51). The additional pillar

and the component positioning table are fixed to the holes on the right-hand side. The conversion

is described in the enclosed assembly instructions.

Order designation Item no.

Optional 2nd pillar for vision teach station

03063366-xx

Designation Item no. Number

Vision teach station pillar

03039431-xx 1

Cable set for vision teach station

03040352-xx 1

Assembly instructions "Optional pillar for vision teach

station" 00196052-xx 1