Operating Manual SIPLACE Multi-Docking Station.pdf - 第10页
2 Operating Safety SIPLACE Multi-Docking-St ation 2.1 Safety Information Operating Manual 6 Special Mode S pecial mode encompasses all tasks that are not p art of normal mode. Th is includes setup, maintenance and clea…
5
SIPLACE Multi-Docking-Station 2 Operating Safety
Operating Manual 2.1 Safety Information
2 Operating Safety
2.1 Safety Information
2.1.1 Hazard Symbols Convention
This manual contains information that you must observe for your personal safety and to avoid
property damage. This information is emphasised by warning triangles and shown, depending on
the severity, as follows:
DANGER or
In this operating manual means that death, serious
injury or considerable damage will occur if this
danger warning is ignored.
WARNING or
In this operating manual means that death, serious injury or
considerable damage may occur if
this warning is ignored.
CAUTION or
in this operating manual means that slight injury or damage may occur if this caution is ignored.
NOTE
In this operating manual is important information on
the product or the respective section of the
manual that the user should actively be aware of.
2.1.2 Operating Modes
You can operate the machine in “normal mode” and “special mode”.
Normal Mode
In normal mode, all functions and tasks for which the machine has been designed are executed
automatically. Normal mode also includes the removal of, e.g., jammed PCBs from areas of the
machine
that can be accessed through doors and covers without the use of tools. If a tool is
necessary to correct a problem (e.g., to unscrew a cover), this falls under
special mode.
2 Operating Safety SIPLACE Multi-Docking-Station
2.1 Safety Information Operating Manual
6
Special Mode
Special mode encompasses all tasks that are not part of normal mode. This includes setup,
maintenance and cleaning, troubleshooting requiring tools, and repair of the machine.
2.1.3 User Roles
To ensure safety, we put certain requirements on persons using the machine that absolutely have
to be fulfilled. Only persons meeting these requirements are authorized to work on the machine.
Persons using the machine refer to any person who is
working with the machine. As the
requirements for these persons highly depend on their tasks, we distinguish the following user
roles:
Operator
The operator is the contract partner of the manufacturer. The manufacturer can legally bind the
operator to fulfil certain conditions when it purchases the machine.
The operator is responsible for proper use of the machine an
d authorizes individuals to work on
the machine in one of the defined user roles. The operator is also responsible for training the
users.
Service Technician
The service technician is an employee of the manufacturer who services the machine in special
mode for troubleshooting and when bringing the machine into service. The service technician is
obliged to apply any available transport and mounting locks, if applicable, before starting any work
on the machine.
He is an expert having mechanical or electrical professional qualifications.
NOTE
Work on the machine and its controller may only be carried out by service technicians of the
manufacturer or its authorized personnel.
7
SIPLACE Multi-Docking-Station 2 Operating Safety
Operating Manual 2.1 Safety Information
Qualified Personnel
As defined in the operating manual of the SIPLACE placement system, qualified or sufficiently
trained personnel refer to persons who are familiar with the installation, operation, and servicing
of the SIPLACE Multi-Docking Station, including the SIPLACE placement system and its
accessories, and who have appropriate qualifications, such as:
– Training or instruction and/or authorization to e
n
ergize/de-energize, isolate, ground, or label
electric circuits and machine parts according to safety standards.
– Training or instruction in maintenance and use of appropriate safety equipment and any
“necessar
y safety equipment” on the SIPLACE Multi-Docking Station in accordance with
safe
ty engineering standards.
– Training by the manufacturer for setup or
service technicians for the docking station for
SIPLACE Multi-Docking Station and the SIPLACE placement system.
– First aid training.
User
The user is only allowed to perform actions on the machine that are necessary to ensure
automatic operation in normal mode. All other required actions are generally performed together
with the qualified person. If a tool is necessary to correct a problem (e.g., to unscrew a cover), this
falls under
special mode. This problem may only be corrected by a qualified person.
NOTE
The user is also required to read Chapter “Safety”.
NOTE
Also read Chapters “User Classification”, “Operating Safety”, and “Training” in the operating
manual of the placement system in conjunction with user roles.