Operating Manual SIPLACE Multi-Docking Station.pdf - 第12页
2 Operating Safety SIPLACE Multi-Docking-St ation 2.1 Safety Information Operating Manual 8 2.1.4 Intended Use DANGER Unintended use of the product is prohibited (see Section 2.1.5 ). “Intended use” is defined as follo…
7
SIPLACE Multi-Docking-Station 2 Operating Safety
Operating Manual 2.1 Safety Information
Qualified Personnel
As defined in the operating manual of the SIPLACE placement system, qualified or sufficiently
trained personnel refer to persons who are familiar with the installation, operation, and servicing
of the SIPLACE Multi-Docking Station, including the SIPLACE placement system and its
accessories, and who have appropriate qualifications, such as:
– Training or instruction and/or authorization to e
n
ergize/de-energize, isolate, ground, or label
electric circuits and machine parts according to safety standards.
– Training or instruction in maintenance and use of appropriate safety equipment and any
“necessar
y safety equipment” on the SIPLACE Multi-Docking Station in accordance with
safe
ty engineering standards.
– Training by the manufacturer for setup or
service technicians for the docking station for
SIPLACE Multi-Docking Station and the SIPLACE placement system.
– First aid training.
User
The user is only allowed to perform actions on the machine that are necessary to ensure
automatic operation in normal mode. All other required actions are generally performed together
with the qualified person. If a tool is necessary to correct a problem (e.g., to unscrew a cover), this
falls under
special mode. This problem may only be corrected by a qualified person.
NOTE
The user is also required to read Chapter “Safety”.
NOTE
Also read Chapters “User Classification”, “Operating Safety”, and “Training” in the operating
manual of the placement system in conjunction with user roles.
2 Operating Safety SIPLACE Multi-Docking-Station
2.1 Safety Information Operating Manual
8
2.1.4 Intended Use
DANGER
Unintended use of the product is prohibited (see Section 2.1.5).
“Intended use” is defined as follows:
– The SIPLACE Multi-Docking Station is used for the external setup of component carts with
fe
ed
er modules, function tests and setup checks.
– The SIPLACE Multi-Docking Station may only be used for the applications described in the
cata
logues and technical specifications, as stipulated in the PCB and component
specifications. Any other use or use beyond this purpose is considered unintended.
– The SIPLACE Multi-Docking Station may only be used with third-pa
rty devices and
components recommended or approved by the manufacturer, and only if approved genuine
spare parts are used. Any other use or use beyond this purpose is considered unintended.
– The SIPLACE Multi-Docking Station may only be used under the conditions defined in these
operating instructions for
installation, connection and operation.
– The SIPLACE Multi-Docking Station may only be connected to the operating voltage, after it
ha
s been properly installed and the installation was checked.
– The SIPLACE Multi-Docking Station may only be put into or remain in
operation, if all required
warning labels on the machine are readable and attached at the correct locations.
– Smooth and safe running of the product requires proper storage, proper transport, correct
assembly and
installation, as well as careful operation, maintenance, and service by
sufficiently qualified personnel authorized to perform those tasks through training by the
manufacturer.
– Intended use also includes following all instructions in the Installa
tion Manual, the Operating
Manual and specifically in the Operating Manual of the respective SIPLACE placement
system, as the SIPLACE Multi-Docking Station is signally and mechanically linked with the
pl
acement system, which requires that the interaction of the machines must be known and
observed.
– Furthermore, with regard to the interfaces and signal sequences it may be necessary to refer
to the
operating manuals for other adjacent modules.
9
SIPLACE Multi-Docking-Station 2 Operating Safety
Operating Manual 2.1 Safety Information
– The contents of the above-mentioned installation and operating manuals of the SIPLACE
Multi-Docking Station, as well as the operating manual of the SIPL
ACE placement system and
of other connected modules/machines, must be fully understood and followed to ensure that
the conditions for starting and activating the SIPLACE Multi-Docking Station, and thus for the
“int
ended use” are present.
The manufacturer assumes no liability for any damage or injuries
and makes no warranties for the
proper and functionally correct behaviour of the SIPLACE Multi-Docking Station in the event of
unintended use.
2.1.5 Unintended use
DANGER
Unintended use of the product poses the risk of serious injury or death and/or severe damage to
property. For this reason, unintended use is strictly prohibited.
The manufacturer assumes no liability for any damage or injuries and makes no warranties for the
proper and functionally correct behaviour of the components in the event of unintended use.
Unintended use of the SIPL
ACE Multi-Docking Station including the SIPLACE unit or other
interfacing line modules includes, for example:
– The use for other purposes than defined in the “Intende
d Use” section, i.e. including using
PCBs and components that are outside the specification.
– Transport, installation, and power connection (electric and/or pneumatic) as well as the
interf
ace connection to the SIPLACE placement system under other installation, connection,
and operating conditions than specified in this operating manual and in the installation manual.
– The electrical connection of the SIPLACE Multi-Docking Station to the operating voltage,
befo
re the installation has not been finished and checked.
– Use of unauthorized spare parts, accessories, and auxiliary modules.
–
Operation of the docking station and the SIPLACE placement system and the performing of
ta
sks by unqualified, insufficiently trained personnel.
– Performing of service and maintenance tasks by personnel lacking
the necessary
qualifications, and performing of tasks that go beyond the extent described in the relevant
documents.
– Removing of covers by unauthorised personnel.
– Operation of the SIPLACE Multi-Docking Station and/or SIPLACE placement system if the
safety
fea
tures have been manipulated or removed.
– Failure to comply with the oper
ating instructions for the SIPLACE Multi-Docking Station or
information on subsequent procedures in the maintenance, service, and installation manuals