Operating Manual SIPLACE Multi-Docking Station.pdf - 第21页
17 SIPLACE Multi-Docking-St ation 3 Product Description Operating Manual 3.2 T echnical Data 3.2 T echnical Dat a Fig. 3 - 2 SIPLACE Multi-Docking S tation – dimensions in millimetres, connections Length x wid th 1046 mm…
3 Product Description SIPLACE Multi-Docking-Station
3.1 Functional Description Operating Manual
16
The major functions of the Multi-Docking Station are:
– Supplying the component cart and the X feeder modules with power
– Providing an infrastructure for the communication
between the PC of the pre-setup station and
the feeder modules
The user can use the Multi-Docking St
ation to conduct function tests on the X feeder modules and
to check the setups outside the production environment. For this purpose, two rows each having
four Multi-Docking Stations are connected via the CAN bus of the pre-setup PC. Each docking
station has its own power and compressed-air connections.
The docking station’s component cart docking d
evice can be adjusted to the desired PCB
transport height. The component cart is pushed into the Multi-Docking Station for the pre-setup.
The component cart slides by roller bearings mounted to its sides on the rails of the component
cart docking device to the power and data interface connector (EDIF). The EDIF in the component
cart docking device is properly positioned to the component table with the EDIF of the feeder
modules.
Component carts of sizes COT 30, 40 and 60 can be used. Optional accessories allow quick and
easy conver
sion.
The standard type of the Multi-Docking Station is desig
ned for size COT 60. Conversion modules
are available for sizes COT 30 and 40.
17
SIPLACE Multi-Docking-Station 3 Product Description
Operating Manual 3.2 Technical Data
3.2 Technical Data
Fig. 3 - 2 SIPLACE Multi-Docking Station – dimensions in millimetres, connections
Length x width 1046 mm x 1120.6 mm
Height (to centring pin) 854 mm at 900 mm PCB transport height
884 mm at 930 mm PCB transport height
904 mm at 950 mm PCB transport height
Weight 216 kg
Compressed-air connection p
min
0.5 MPa (5.0 bar) / p
max
1.0 MPa (10.0 bar)
Compressed-air connection Coupling connector KS 2-M5-A
Flow 5 Nl/min
a
a. Under atmospheric standard conditions at 20°C and 1013 hPa
Supply voltage 88 - 264 V AC
No. of wires / phases 3 / 1
Frequency max. 63 Hz
Rated current max. 2 A
Power 0,23 kW
Protection 2 x 8 A
2
3
1
1046
854
884
904
Height to centring pin
(1) Compressed-air connection
(2) CAN bus port
(3) Power supply socket
1120.6
3 Product Description SIPLACE Multi-Docking-Station
3.3 Transport Lock Operating Manual
18
3.3 Transport Lock
After unpacking and before using the docking station for the first time, be sure to remove the
transport locks.
Fig. 3 - 3 Transport locks
(1) 2x shaft transport lock on the lifting axis
(2) 4x side wall transport lock
(3) Storage place for transport locks 1
To loosen the transport lock 1, you
need to remove the rear cover. Loosen the transport lock 1
and fix it loosely to the storage place 3. Replace the cover.
To remove the transport lock 2, cut
the four red cable ties with a suitable tool.
1
2
3