Operating Manual SIPLACE Multi-Docking Station.pdf - 第13页
9 SIPLACE Multi-Docking-St ation 2 Operating Safety Operating Manual 2.1 Safety Information – The co ntents of the ab ove-mentioned inst allation and operating manuals of th e SIPLA CE Multi-Docking S tation , as well as…
2 Operating Safety SIPLACE Multi-Docking-Station
2.1 Safety Information Operating Manual
8
2.1.4 Intended Use
DANGER
Unintended use of the product is prohibited (see Section 2.1.5).
“Intended use” is defined as follows:
– The SIPLACE Multi-Docking Station is used for the external setup of component carts with
fe
ed
er modules, function tests and setup checks.
– The SIPLACE Multi-Docking Station may only be used for the applications described in the
cata
logues and technical specifications, as stipulated in the PCB and component
specifications. Any other use or use beyond this purpose is considered unintended.
– The SIPLACE Multi-Docking Station may only be used with third-pa
rty devices and
components recommended or approved by the manufacturer, and only if approved genuine
spare parts are used. Any other use or use beyond this purpose is considered unintended.
– The SIPLACE Multi-Docking Station may only be used under the conditions defined in these
operating instructions for
installation, connection and operation.
– The SIPLACE Multi-Docking Station may only be connected to the operating voltage, after it
ha
s been properly installed and the installation was checked.
– The SIPLACE Multi-Docking Station may only be put into or remain in
operation, if all required
warning labels on the machine are readable and attached at the correct locations.
– Smooth and safe running of the product requires proper storage, proper transport, correct
assembly and
installation, as well as careful operation, maintenance, and service by
sufficiently qualified personnel authorized to perform those tasks through training by the
manufacturer.
– Intended use also includes following all instructions in the Installa
tion Manual, the Operating
Manual and specifically in the Operating Manual of the respective SIPLACE placement
system, as the SIPLACE Multi-Docking Station is signally and mechanically linked with the
pl
acement system, which requires that the interaction of the machines must be known and
observed.
– Furthermore, with regard to the interfaces and signal sequences it may be necessary to refer
to the
operating manuals for other adjacent modules.
9
SIPLACE Multi-Docking-Station 2 Operating Safety
Operating Manual 2.1 Safety Information
– The contents of the above-mentioned installation and operating manuals of the SIPLACE
Multi-Docking Station, as well as the operating manual of the SIPL
ACE placement system and
of other connected modules/machines, must be fully understood and followed to ensure that
the conditions for starting and activating the SIPLACE Multi-Docking Station, and thus for the
“int
ended use” are present.
The manufacturer assumes no liability for any damage or injuries
and makes no warranties for the
proper and functionally correct behaviour of the SIPLACE Multi-Docking Station in the event of
unintended use.
2.1.5 Unintended use
DANGER
Unintended use of the product poses the risk of serious injury or death and/or severe damage to
property. For this reason, unintended use is strictly prohibited.
The manufacturer assumes no liability for any damage or injuries and makes no warranties for the
proper and functionally correct behaviour of the components in the event of unintended use.
Unintended use of the SIPL
ACE Multi-Docking Station including the SIPLACE unit or other
interfacing line modules includes, for example:
– The use for other purposes than defined in the “Intende
d Use” section, i.e. including using
PCBs and components that are outside the specification.
– Transport, installation, and power connection (electric and/or pneumatic) as well as the
interf
ace connection to the SIPLACE placement system under other installation, connection,
and operating conditions than specified in this operating manual and in the installation manual.
– The electrical connection of the SIPLACE Multi-Docking Station to the operating voltage,
befo
re the installation has not been finished and checked.
– Use of unauthorized spare parts, accessories, and auxiliary modules.
–
Operation of the docking station and the SIPLACE placement system and the performing of
ta
sks by unqualified, insufficiently trained personnel.
– Performing of service and maintenance tasks by personnel lacking
the necessary
qualifications, and performing of tasks that go beyond the extent described in the relevant
documents.
– Removing of covers by unauthorised personnel.
– Operation of the SIPLACE Multi-Docking Station and/or SIPLACE placement system if the
safety
fea
tures have been manipulated or removed.
– Failure to comply with the oper
ating instructions for the SIPLACE Multi-Docking Station or
information on subsequent procedures in the maintenance, service, and installation manuals
2 Operating Safety SIPLACE Multi-Docking-Station
2.1 Safety Information Operating Manual
10
of the SIPLACE Multi-Docking Station.
– Failure to observe the information in the operatin
g man
ual of the respective placement system
or other machines interfacing the SIPLACE Multi-Docking Station and thus operating the
SIPLACE Multi-Docking St
ation without knowledge of the interaction of each machine within
the line.
2.1.6 Important Information on Operating Safety
To maintain operating safety, compliance with the following items is mandatory.
2.1.6.1 General Safety Regulations
DANGER
Despite all of the safety features
provided by the manufacturer, improper operation of the
SIPLACE Multi-Docking Station or incorrect procedures may cause
serious injuries or death and/
or severe damage to property during maintenance, setup, servicing or installation!
– Observe the safety regulations provided in the manuals.
– Also follow the specific safety
rules of your country!
– Do not modify the machine in any way prior to obtaining written approval from the
man
ufacturer.
– Label the power cords adequately so that they can be clearly assigned to each module of the
pl
acement/production line.
– Be sure to route and secure all cables (power
and interface cables) to the SIPLACE Multi-
Docking Station to avoid any danger of people tripping over them.
– Immediately replace any warning and danger labels that are att
ached to the wrong place,
missing, or difficult to read. Clean the labels as described in this manual.
– Covers on the SIPLACE Multi-Docking Station that can be removed or opened only with tools
or wit
h the machine key must only be removed by personnel authorized for this task.