Operating Manual SIPLACE Multi-Docking Station.pdf - 第15页
11 SIPLACE Multi-Docking-St ation 2 Operating Safety Operating Manual 2.1 Safety Information – It is expressly prohibite d to modify/bypass an y pr otective features (incl uding query un its, such as safety limit switche…
2 Operating Safety SIPLACE Multi-Docking-Station
2.1 Safety Information Operating Manual
10
of the SIPLACE Multi-Docking Station.
– Failure to observe the information in the operatin
g man
ual of the respective placement system
or other machines interfacing the SIPLACE Multi-Docking Station and thus operating the
SIPLACE Multi-Docking St
ation without knowledge of the interaction of each machine within
the line.
2.1.6 Important Information on Operating Safety
To maintain operating safety, compliance with the following items is mandatory.
2.1.6.1 General Safety Regulations
DANGER
Despite all of the safety features
provided by the manufacturer, improper operation of the
SIPLACE Multi-Docking Station or incorrect procedures may cause
serious injuries or death and/
or severe damage to property during maintenance, setup, servicing or installation!
– Observe the safety regulations provided in the manuals.
– Also follow the specific safety
rules of your country!
– Do not modify the machine in any way prior to obtaining written approval from the
man
ufacturer.
– Label the power cords adequately so that they can be clearly assigned to each module of the
pl
acement/production line.
– Be sure to route and secure all cables (power
and interface cables) to the SIPLACE Multi-
Docking Station to avoid any danger of people tripping over them.
– Immediately replace any warning and danger labels that are att
ached to the wrong place,
missing, or difficult to read. Clean the labels as described in this manual.
– Covers on the SIPLACE Multi-Docking Station that can be removed or opened only with tools
or wit
h the machine key must only be removed by personnel authorized for this task.
11
SIPLACE Multi-Docking-Station 2 Operating Safety
Operating Manual 2.1 Safety Information
– It is expressly prohibited to modify/bypass any protective features (including query units, such
as safety limit switches and light barriers).
– After each intervention into the machine (maintenan
ce, repair, etc.), the service technician or
a qualified person must execute a test run.
– For any necessary interventions for which sufficiently trained and authorized personnel are not
available in your facility
, you must arrange for a service technician of the manufacturer!
The manufacturer will reject any claims
for damages or consequential damages resulting from
improper interventions!
– If the operator recognises any significant pote
ntial dangers during operation of the SIPLACE
Multi-Docking Station including its interaction with the SIPLACE pla
cement system, the
operator is obligated to notify the manufacturer in writing without delay to allow the
manufacturer to take corrective measures to reduce the potential danger.
2.1.6.2 For the Safety of Individuals and Operating Personnel
– The user of the machine may only perform tasks for which he has been sufficiently trained and
which he fully masters.
– The tasks defined in the operating manual for each user
role in normal and special mode must
be observed.
– Never open any safety door/cover of the SIPLACE Multi-Docking Station or SIPLACE
placement sys
tem or other adjacent modules, if you are not fully familiar with the working
principles and functions of these machines!
– Open the safety doors and covers of the SIPLACE Multi-Docking Station and the protective
hoods an
d covers of the SIPLACE placement system only if you have been instructed to do so
in the operating manual, in another manual or on the screen of the station computer, or when
the machines are switched off, powered down and secured properly.
– For your own safety, wear professional clothin
g
meeting the standards of your workers
compensation board, i.e., no clothes with wide sleeves, etc.
– Reduce the risk of danger by not wearing ribbon
s, chains, or ties at work.
– Individuals with long hair must wear a bouffant cap.
2 Operating Safety SIPLACE Multi-Docking-Station
2.1 Safety Information Operating Manual
12
DANGER
The SIPLACE Multi-Docking Station is driven by electricity. Electrical
devices inherently include
parts under dangerous voltage during operation!
Prior to any activities that are not part of the normal operation of the SIPLACE Multi-Docking
Sta
tion, such as servicing, maintenance, and repair, be sure to switch off the machine at the main
power
switch and disconnect the power cord from the power supply.
Before any service, mainte
nance, or repair work, the SIPLACE Multi-Docking Station must be
locked with a personal padlock to prevent it from being switched on again at the main power switch
and a corresponding label must be provided. The power cords must be secured against accidental
reconnecting! Afterwards, the necessary work can be performed with caution.
Also observe the specific safety information in the respective manual when working on electrical
installations.
2.1.7 For Environmentally Safe Disposal of Materials and Machine Parts
The SIPLACE Multi-Docking Station uses only substances, materials, and parts that can be
separated easily and disposed of in an environmentally friendly manner. Neither the assembly/
disassembly nor operation of the SIPLACE Multi-Docking Station requires any hazardous
substances that are harmful to the environment.
NOTE
The proper and environmentally friendly disposal of the machine, its operating materials, and any
expendable and worn-out parts lies solely in the responsibility of the operator of the equipment.
Be sure to observe the national legal regulations for waste disposal and environmental protection.