00195311-0202_SM_CurrentLimiter_DE EN.pdf - 第29页
Service Manual: Replacing the inrush current limiter, SIPLACE X-series 10/2006 Edition 29 For fixing of the new incrush cu rr ent limiter use the old hexagonal sp acers, if the fing angle on the photo below is present (p…
Service Manual: Replacing the inrush current limiter, SIPLACE X-series
10/2006 Edition
28
: Remove the nut in the middle of the inrush current limiter.
2
2
: Remove the inrush current limiter.
2
2
2
2
2
2
2
2
2
2
2
2
2
2
Nut
Service Manual: Replacing the inrush current limiter, SIPLACE X-series
10/2006 Edition
29
For fixing of the new incrush current limiter use the old hexagonal spacers, if the fing angle on the
photo below is present (photo shwos already the new grid). 2
2
2
If the fixing angle is not present, use the new hexagonal spacers from the retrofit kit: 2
: Screw together the hexagonal spacers from the retrofit kit.
2
Connected, these are longer than the old spacers. 2
2
Fixing angle
Hexagonal spacer, old
Hexagonal spacer, new
Service Manual: Replacing the inrush current limiter, SIPLACE X-series
10/2006 Edition
30
: Attach the new inrush current limiter.
2
2
: Screw the nut in the middle of the inrush current limiter.
: Screw on the old or the new (connected) hexagonal spacers.
2
Hexagonal spacers