00195311-0202_SM_CurrentLimiter_DE EN.pdf - 第34页
Service Manual: Replacing the inrush current limiter, SIPLACE X-se ries 10/2006 Edition 34 : Clip the earth terminal from th e retrofit kit onto the to p hat rail (see photograph) Clip the narrow clamp from the retrofit …
Service Manual: Replacing the inrush current limiter, SIPLACE X-series
10/2006 Edition
33
: Check that the edge protector is attached to the grid.
2
2
: Remove the terminal end piece from the top hat rail.
The connector at X1 may be removed for ease of access.
2
Edge protector
Terminal end piece
Connector
Service Manual: Replacing the inrush current limiter, SIPLACE X-series
10/2006 Edition
34
: Clip the earth terminal from the retrofit kit onto the top hat rail (see photograph)
Clip the narrow clamp from the retrofit kit onto the top hat rail (see photograph).
Insert the connector once more.
2
2
2
2
2
2
2
2
2
2
2
Narrow terminal end piece
Earth terminal
Connector
Service Manual: Replacing the inrush current limiter, SIPLACE X-series
10/2006 Edition
35
: Run the PE conductor from the cover grid to the earth terminal.
2
: Insert the earthing cable into the PE terminal.
The top hat rail is earthed.
2
Cover grid
PE conductor
PE conductor
PE terminal
Cable ties
PE conductor
PE terminal