TRS GEM Manual for Intel Ver 1.1.pdf - 第113页
GEM Manual for DEK P rinters Equipment Variables Issue 1.1 March 20th, 2014 Page 113 of 152 Page 113 of 152 1. Parameter I d ;Ty pe U4 2. Parameter Na me ;Ty pe A 3. Parameter’s Old Va lue ;Ty pe A 4. Parameter’s Modifie…
GEM Manual for DEK Printers Equipment Variables
Issue 1.1 March 20th, 2014 Page 112 of 152 Page 112 of 152
The items in the list are as follows:
No.
Item
Limits
Monitor
Description
Type
Range
1
Limit Blockage Ave
Yes
Stencil average percentage aperture blockage
for limit set.
F4
0-100 %
2
Limit Blockage Max
Yes
Stencil maximum percentage aperture blockage
for limit set.
F4
0-100 %
3
Limit Blockage Max Site ID
No
Site ID that generated the maximum blockage
for limit set.
A20
Up to 20
characters max.
4
Limit Blockage Min
Yes
Stencil minimum percentage aperture blockage
for limit set.
F4
0-100 %
5
Limit Blockage Max Site ID
No
Site ID that generated the minimum blockage
for limit set.
A20
Up to 20
characters max.
6
Limit Paste Ave
Yes
Average paste present for limit set.
F4
0-100 %
7
Limit Paste Max
Yes
Maximum paste present for limit set.
F4
0-100 %
8
Limit Paste Max Site ID
No
Site ID that generated the maximum paste
present for limit set.
A20
Up to 20
characters max.
9
Limit Paste Min
Yes
Minimum paste present for limit set.
F4
0-100 %
10
Limit Paste Min Site ID
No
Site ID that generated the minimum paste
present for limit set.
A20
Up to 20
characters max.
11
Limit Volume Ave
Yes
Average paste volume for limit set.
F4
0-100 %
12
Limit Volume Max
Yes
Maximum paste volume for limit set.
F4
0-100 %
13
Limit Volume Max Site ID
No
Site ID that generated the maximum volume for
limit set.
A20
Up to 20
characters max.
14
Limit Volume Min
Yes
Minimum paste volume for limit set.
F4
0-100%
15
Limit Volume Min Site ID
No
Site ID that generated the minimum volume for
limit set.
A20
Up to 20
characters max.
16
Limit Print X Ave
Yes
Average paste-pad X error for limit set.
F8
1 mm
17
Limit Print X Max
Yes
Maximum paste-pad X error for limit set.
F8
1 mm
18
Limit Print X Max Site ID
No
Site ID that generated the maximum X error for
limit set.
A20
Up to 20
characters max.
19
Limit Print X Min
Yes
Minimum paste-pad X error for limit set.
F8
1 mm
20
Limit Print X Min Site ID
No
Site ID that generated the minimum X error for
limit set.
A20
Up to 20
characters max.
21
Limit Print Y Ave
Yes
Average paste-pad Y error for limit set.
F8
1 mm
22
Limit Print Y Max
Yes
Maximum paste-pad Y error for limit set.
F8
1 mm
23
Limit Print Y Max Site ID
No
Site ID that generated the maximum Y error for
limit set.
A20
Up to 20
characters max.
24
Limit Print Y Min
Yes
Minimum paste-pad Y error for limit set.
F8
1 mm
25
Limit Print Y Min Site ID
No
Site ID that generated the minimum Y error for
limit set.
A20
Up o 20
characters max.
26
Limit Smear
Yes
Stencil paste smear area for limit set.
F8
5 sq. mm
27
Limit Bridging
Yes
Board pad bridging for limit set.
F8
1 mm
28
Limit ID
No
The limit set name.
A20
Up to 20
characters max.
Exception: A zero length list m = 0 indicates that no limit sets are enabled for SPC output.
7.4.2 Modified Parameter List
The Modified Parameter list is structured as follows:
<Modified Parameter List>:
Structure: L, m ; m = Number of Modified Parameter list
1. L,4
GEM Manual for DEK Printers Equipment Variables
Issue 1.1 March 20th, 2014 Page 113 of 152 Page 113 of 152
1. Parameter Id ;Type U4
2. Parameter Name ;Type A
3. Parameter’s Old Value ;Type A
4. Parameter’s Modified Value ;Type A
…
m.
List of Parameter Ids and names are listed in Appendix A.
7.4.3 Traceability Data
The traceability data is a list of items structured as follows:
Structure: L, m ; m = number of trace items
1. L,3
1. Item name ; Type A
2. Item value ; Type A
3. Item units ; Type A
Possible items are as follows:
Category
Item Name
Description and Comments
Fixed
DateTime
The date and time the record was created as the
product leaves the machine and the entry is
constructed before being written to the data file.
Product ID
The product serial number or identifier. This is
normally the products’ barcode value.
State
A string representing the overall state of the
product as it leaves the machine. This provides a
good board/bad board state.
Values “Pass” or “Fail”
State Detail
A string that contains the detail of the state
reasoning. For example if the board were rejected
due to a failed inspection operation, it would
contain a message reflecting this.
Product Name
The name of the product as defined within the
printer control software.
Batch ID
The batch or lot ID associated with the products
being printed.
Machine Serial No.
The identifier that uniquely represents the printer
machine.
Machine ID
The identifier that represents the printer machine
type
Operator ID
The identifier that represents the operator
currently logged into the printer control software.
Line ID
An identifier that represents the line the printer
belongs to.
User Defined Field 1
Any user-defined fields that are associated with
traceability, disabled user-defined fields are not
included. The title will be the index of the defined
field.
User Defined Field 2
User Defined Field 3
User Defined Field 4
User Defined Field 5
Process Parameters
Front Pressure
The front squeegee / Proflow process defined
pressure value (not actual – SPC Data contains
actual)
GEM Manual for DEK Printers Equipment Variables
Issue 1.1 March 20th, 2014 Page 114 of 152 Page 114 of 152
Category
Item Name
Description and Comments
Rear Pressure
The rear squeegee process defined pressure value
(not actual – SPC data contains actual).
Front Print Speed
The process defined front print speed (i.e. the rate
the front squeegee moves when performing the
print stroke). The SPC data contains the actual
value.
Rear Print Speed
The process defined rear print speed (i.e. the rate
the rear squeegee moves when performing the
print stroke). The SPC data contains the actual
value.
Print Front Limit
The maximum limit the front print stroke can be
started from
Print Rear Limit
The maximum limit the rear print stroke can be
started from
Forward X Offset
The offset applied in X to the screen when
performing the forward print stroke
Reverse X Offset
The offset applied in X to the screen when
performing the rear print stroke
Forward Y Offset
The offset in Y applied to the screen during the
front print stroke
Reverse Y Offset
The offset in Y applied to the screen during the
rear print stroke
Reverse Theta Offset
The angle at which the screen is positioned for the
reverse print stroke
Forward Theta Offset
The angle at which the screen is positioned for the
forward print stroke
Separation Speed
The rate at which the board is separated from the
screen/stencil.
Separation Distance
The distance the separation speed applies to
before separating normally.
Print Gap
The gap left between the board and stencil/screen
when printing.
Clean Rate 1 / Cyclone Clean Rate /
Blue Clean Rate
The number of print cycles that the clean 1,
cyclone or blue cleaner operation occurs.
Clean Rate 2
The number of print cycles that the clean 2
operation occurs.
Vortex Clean Rate
The number of print cycles that the Vortex clean
operation occurs.
Paste While Clean
Indicates if a dispense operation is performed
when a clean operation occurs.
Paste Dispense Rate
The number of prints that occur before the paste
dispenser performs a dispense operation.
Alternative Dispense Rate
The number of prints that occur before the
alternative dispense operation is performed.
Proflow System Pressure
The pressure that was applied to the Proflow unit
when printing
Ball Place App Speed
The rate at which the ball placement applicator
moves
Ball Place App Dist
The distance the ball placement applicator moves
Ball Place Tbl Dwn Speed
The rate at which the table moves down when
using ball placement
Ball Place Hopper Pressure
The pressure applied to the ball placement hopper
SPC
X Pre Align Dev
Deviation in the x axis for the pre print alignment
Y Pre Align Dev
Deviation in the y axis for the pre print alignment
Theta Pre Align Dev
Deviation in the theta angle for the pre print
alignment
Board Stretch
The board length.
Pre Board Stretch
Deviation in the pre print board length stretch
Pre Fid 1 X Align Dev
Pre fiducial 1 deviation in the x alignment