TRS GEM Manual for Intel Ver 1.1.pdf - 第129页

GEM Manual for DEK P rinters Event Messages Issue 1.1 March 20th, 2014 Page 129 of 152 Page 129 of 152 9.1 Control Model Events EVENT - CEID DESCRIPTION 31450 Control State – Change to L OCAL. 31451 Control State – Chang…

100%1 / 152
GEM Manual for DEK Printers Event Messages
Issue 1.1 March 20th, 2014 Page 128 of 152 Page 128 of 152
Event Messages
CONTROL MODEL 9.1
PROCESS MODEL 9.2
PROCESS PROGRAM MANAGEMENT 9.3
EQUIPMENT CONSTANT 9.4
ACKNOWLEDGE TERMINAL MESSAGE 9.5
ALARMS 9.6
SPOOLING 9.7
EQUIPMENT ERROR 9.8
EQUIPMENT SPECIFIC INFORMATION 9.9
MATERIAL MOVEMENT 9.10
HOST SPECIFIC INFORMATION 9.11
LIMITS MONITORING 9.12
SUGGESTED EVENT REPORTS 9.13
SIMULTANEOUS EVENTS (TIME) 9.14
MODIFIED PARAMETERS 9.15
GEM Manual for DEK Printers Event Messages
Issue 1.1 March 20th, 2014 Page 129 of 152 Page 129 of 152
9.1 Control Model Events
EVENT - CEID
DESCRIPTION
31450
Control State – Change to LOCAL.
31451
Control State – Change to OFF-LINE.
31452
Control State – Change to REMOTE.
31456
Operator command issued.
9.2 Process Model Events
EVENT - CEID
DESCRIPTION
90001
Equipment moved to Recovery state.
90002
Equipment moved to Setup state.
90003
Equipment moved to Ready state.
90004
Equipment moved to Maintenance state.
90005
Equipment moved to Waiting state.
90006
Equipment moved to Running state.
90007
Equipment moved to Down state.
9.3 Process Program Management Events
EVENT - CEID
DESCRIPTION
31265
Process program loaded.
31266
New process program created and loaded.
31267
Process program change.
31346
Product Data modified (with change details – see section 9.15)
32035
Operator deleted process program
40416
Z-Lock Not Fitted Warning
40417
Local Parameters changed to
40418
Local parameters not loaded
40419
Local Parameters not applied for print
40420
Local Parameters not reinstated after print
40421
Local Parameters not saved
9.4 Equipment Constant Change Event
EVENT - CEID
DESCRIPTION
31440
Equipment constant change.
9.5 Acknowledge Terminal Message Event
EVENT - CEID
DESCRIPTION
31441
Acknowledge terminal message.
GEM Manual for DEK Printers Event Messages
Issue 1.1 March 20th, 2014 Page 130 of 152 Page 130 of 152
9.6 Alarm Events
EVENT - CEID
DESCRIPTION
31253
Cover opened.
31254
Cover closed.
31314
Head left partly open.
31315
Head moved to safe state.
9.7 Spooling Events
EVENT - CEID
DESCRIPTION
31453
Spooling activated.
31454
Spooling deactivated.
31455
Spool transmission failure.
9.8 Equipment Error Events
EVENT - CEID
DESCRIPTION
10003
System power down.
31201
Pneumatic power down.
31202
Front squeegee error.
31203
Rear squeegee error.
31204
Rising table error.
31205
Print carriage error.
31206
Paste carriage error.
31207
Camera X axis error.
31208
Camera Y axis error.
31209
Rail width error.
31210
Screen XF error.
31211
Screen XR error.
31212
Screen Y error.
31213
Paste cartridge tilt error.
31214
Screen changer drive error.
31215
Board stop stuck.
31216
Board clamp stuck.
31217
Board stuck in rails.
31218
Unable to find fiducial.
31219
Rail lifted error.
31220
Print pressure error.
31221
File error.
31222
Unable to recover.
31223
Recovery started.
31224
Recovered.
31225
Upline transfer error.
31226
Downline transfer error.
31227
Dual shuttle fault.
31230
Screen changer fault.
31232
Lid bolt fault.