TRS GEM Manual for Intel Ver 1.1.pdf - 第54页
GEM Manual for DEK P rinters SECS II Implementation Issue 1.1 March 20th, 2014 Page 54 of 152 SECS II Implementatio n MESSAGE SU MMA RY 6.1 SECS II VARIA BLE DAT A DEFINIT IONS 6.2 STREAM 1: EQ UIPMENT ST ATUS 6.3 STREAM…
GEM Manual for DEK Printers Capabilities
Issue 1.1 March 20th, 2014 Page 53 of 152 Page 53 of 152
5.13 Verification and Traceability
The Verification and Traceability (V&T) option allows for detailed tracking and control of the process,
materials and products produced. Sub-options can be enabled to allow any or all materials to be
verified before use and all relevant data can be traced on a per-product basis.
5.13.1 Verification
Verification is controlled from the machine. There is no direct involvement from GEM beyond some
of the remote commands (see Appendix A) will return a failure code (HCACK of 66) if there are any
unverified items. An event (CEID 2034) will be sent and the failed item is available in a data variable
(DVID 2034).
5.13.2 Traceability
With traceability enabled, when a product finishes printing, an event is sent (CEID 40177) to the host
to identify that the traceability data is available. This data is available through a discrete data variable
(DVID 2033). This data variable contains all of the traceability data. Attempting to link this data
variable with any event except CEID 40177 will be refused.
The data lists all the product, process, verified items and SPC data associated with the last product
printed. A status value indicates if the product was printed successfully or not. See section 7.4 for
more details.
GEM Manual for DEK Printers SECS II Implementation
Issue 1.1 March 20th, 2014 Page 54 of 152
SECS II Implementation
MESSAGE SUMMARY 6.1
SECS II VARIABLE DATA DEFINITIONS 6.2
STREAM 1: EQUIPMENT STATUS 6.3
STREAM 2: EQUIPMENT CONTROL AND DIAGNOSTICS 6.4
STREAM 5: EXCEPTION (Alarm) REPORTING 6.5
STREAM 6: DATA COLLECTION 6.6
STREAM 7: PROCESS PROGRAM MANAGEMENT 6.7
STREAM 9: SYSTEM ERRORS 6.8
STREAM 10: TERMINAL SERVICES 6.9
STREAM 14: OBJECT SERVICES 6.10
GEM Manual for DEK Printers SECS II Implementation
Issue 1.1 March 20th, 2014 Page 55 of 152 Page 55 of 152
6.1 MESSAGE SUMMARY
The following is a summary of the SECS II streams and functions supported by the DEK
printer to meet the requirements of GEM. Additional non GEM messages are documented in
section 8.
Host Initiated Messages:
Primary
Description
Reply
Description
S1F1
Are You There Request
S1F2
On-Line Data
S1F3
Selected Equipment Status Request
S1F4
Selected Equipment Status Data
S1F11
Status Variable Namelist Request
S1F12
Status Variable Namelist
S1F13
Establish Communications Request
S1F14
ECR Acknowledge
S1F15
Off-Line Control State Request
S1F16
Off-Line Control State Data
S1F17
On-Line Control State Request
S1F18
On-Line State Data
S2F13
Equipment Constant Request
S2F14
Equipment Constant Data
S2F15
New Equipment Constant Send
S2F16
New Equipment Constant Acknowledge
S2F17
Date & Time Request
S2F18
Date & Time Data
S2F23
Trace Initialise Send
S1F26
Trace Initialise Acknowledge
S2F25
Loop Back Diagnostic Request
S2F26
Loop Back Diagnostic Data
S2F29
Equipment Constant Namelist Request
S2F30
Equipment Constant Namelist Data
S2F31
Date & Time Set Request
S2F32
Date & Time Acknowledge
S2F33
Define Report
S2F34
Define Report Acknowledge
S2F35
Link Event Report
S2F34
Link Event Report Acknowledge
S2F37
Enable / Disable Event Report
S2F38
Enable / Disable Event Report Acknowledge
S2F39
Multi-block Inquire
S2F40
Multi-block Grant
S2F41
Host Command Send
S2F42
Host Command Acknowledge
S2F43
Reset Spooling Streams and Functions
S2F44
Reset Spooling Acknowledge
S2F45
Define Variable Limit Attributes
S2F46
Variable Limit Attribute Acknowledge
S2F47
Variable Limit Attribute Request
S2F48
Variable Limit Attribute Send
S5F3
Enable / Disable Alarm Send
S5F4
Enable / Disable Alarm Send Acknowledge
S5F5
List Alarms Request
S5F6
List Alarms Data
S5F7
List Enabled Alarms Request
S5F8
List Enabled Alarms Data
S6F15
Event Report Request
S6F16
Event Report Data
S6F19
Individual Report Request
S6F20
Individual Report Data
S6F23
Request Spooled Data
S6F24
Request Spooled Data Acknowledge
S7F1
Process Program Load Inquire
S7F2
Process Program Load Grant
S7F3
Process Program Send
S7F4
Process Program Acknowledge
S7F5
Process Program Request
S7F6
Process Program Data
S7F17
Delete Process Program Send
S7F18
Delete Process Program Acknowledge
S7F19
Current EPPD
6
Request
S7F20
Current EPPD Data
S10F3
Terminal Display, Single
S10F4
Terminal Display, Single Acknowledge
S10F5
Terminal Display, Multiblock
S10F6
Terminal Display, Multiblock Acknowledge
S14F1
Get Attribute Request
S14F2
Get Attribute Data
Equipment Initiated Messages:
Primary
Description
Reply
Description
S1F1
Are You There Request
S1F2
On-Line Data
6
EPPD = Equipment Process Program Directory