TRS GEM Manual for Intel Ver 1.1.pdf - 第145页

GEM Manual for DEK P rinters Additional Capabilities Issue 1.1 March 20th, 2014 Page 145 of 152 Page 145 of 152 Equipment to Host Message Structure : Stream 13 Function 6 L ,4 1. <HANDLE> 2. <ACKC13> 3. <C…

100%1 / 152
GEM Manual for DEK Printers Additional Capabilities
Issue 1.1 March 20th, 2014 Page 144 of 152 Page 144 of 152
Host requests that the equipment transfers the event log file to the host:
Comments
Host
Equipment
Comments
Host requests upload of Event Log.
If equipment ready Host requests
read data set
Host requests further data sets
Host sends Close data set message
S13F3 -->
S13F5 -->
S13F5 -->
S13F7 -->
<-- S13F4
<-- S13F6
<-- S13F6
<-- S13F8
[IF] equipment System Status = READY
<ACKC13> = data set open
[ELSE] not ready
<ACKC13> = not ready
[END_IF]
equipment sends data blocks.
<ACKC13> = success
equipment sends data blocks.
<ACKC13> = success
equipment closes data set.
<ACKC13> = success
Host to Equipment Message Structure:
Stream 13 Function 3
L,3
1. <HANDLE>
2. <DSNAME>
3. <CKPNT>
Equipment to Host Message Structure:
Stream 13 Function 4
L,5
1. <HANDLE>
2. <DSNAME>
3. <ACKC13>
4. <RTYPE>
5. <RECLEN>
Host to Equipment Message Structure:
Stream 13 Function 5
L,2
1. <HANDLE>
2. <READLN>
GEM Manual for DEK Printers Additional Capabilities
Issue 1.1 March 20th, 2014 Page 145 of 152 Page 145 of 152
Equipment to Host Message Structure:
Stream 13 Function 6
L,4
1. <HANDLE>
2. <ACKC13>
3. <CKPNT>
4. <FILDAT>
Host to Equipment Message Structure:
Stream 13 Function 7
L,1
1. <HANDLE>
Equipment to Host Message Structure:
Stream 13 Function 8
L,2
1. <HANDLE>
2. <ACKC13>
GEM Manual for DEK Printers Appendix A
Issue 1.1 March 20th, 2014 Page 146 of 152 Page 146 of 152
Appendix A
11.11 REMOTE COMMANDS
This appendix details the valid commands and parameters that may be sent using the Remote
Command SECS II transaction, S2F41.
The commands and parameter names passed in S2F41 are ASCII, while the parameter values
are numeric or ASCII depending upon the command. The following table lists the valid
commands RCMD for both S2F21 and S2F41.
S2F41 RCMD (ASCII)
S2F21
DESCRIPTION
START
0
Start processing with the currently loaded process program.
STOP
1
Stop processing at the end of the current print cycle.
ERASE_LOG
2
Delete all event log data.
ERASE_BATCH
3
Clear all batch data in the management information file.
ERASE_SESSION
4
Clear all session data in the management information file.
RENAME_PRODUCT
5
Rename process program to parameter value.
See parameter table below.
ADJUST_PARAMETER
6
Set process program parameter to new value.
See parameter table below.
CLEAN
7
Clean screen type 1 according to current process program
parameters.
CLEAN_2
none
Clean screen type 2 according to current process program
parameters.
PASTE
8
Add paste automatically.
PP-SELECT
none
Select process program for execution.
See parameter table below.
CHANGE_SCREEN
none
Load or unload the screen using the method specified by the
parameter. See parameter table below.
KNEAD_PASTE
none
Use the next board that arrives to perform a paste knead cycle.
PAUSE
SAVE_PRODUCT
none
none
Pause print cycle operation running printer. Remote command
START (S2F41) or 0(S2F21) will resume printing. Remote
command STOP (S2F41) or 1(S2F21) will stop processing at
the end of the print cycle.
Save changes made to current process program
The following commands can be rejected if the Verification option is enabled and a dependant
item has been enabled, but not been verified. The applicable items for each command are
tabulated below:
Command
Item
Paper
Vortex Cassette
Solvent
Print Medium
Screen
Squeegee Blades
Squeegee
Holders
ProFlow Head
Start
Clean/Clean_2
Paste
Change Screen
(load)
Knead Paste