TRS GEM Manual for Intel Ver 1.1.pdf - 第75页

GEM Manual for DEK P rinters SECS II Implementation Issue 1.1 March 20th, 2014 Page 75 of 152 Page 75 of 152 S2F39 Multi-block Inquire (DMBI) S2F40 Multi-block Grant (DM BG) Description: I f any host initiated primary me…

100%1 / 152
GEM Manual for DEK Printers SECS II Implementation
Issue 1.1 March 20th, 2014 Page 74 of 152 Page 74 of 152
S2F37 Enable / Disable Event Report (EDER)
S2F38 Enable / Disable Event Report Acknowledge (EERA)
Description: The host uses EDER to enable or disable reporting for a specified group of
events (CEID’s). If any errors are detected in EDER, then no changes will be made i.e.
no partial changes.
A. Host Initiated
Host to equipment: S2F37
Structure: L,2
1. <CEED> enable/disable
2. L,n
1. <CEID1> collection event 1
.
.
n. <CEIDn> collection event n
Exception: If n = 0 then all events are enabled/disabled.
Equipment to host: S2F38
Structure: <ERACK >
B. Equipment Initiated - Not applicable.
GEM Manual for DEK Printers SECS II Implementation
Issue 1.1 March 20th, 2014 Page 75 of 152 Page 75 of 152
S2F39 Multi-block Inquire (DMBI)
S2F40 Multi-block Grant (DMBG)
Description: If any host initiated primary message is multi-block, it must be preceded by
this transaction, the equipment must reply with GRANT = 0 for the multi-block
message to proceed.
A. Host Initiated
Host to equipment: S2F39
Structure: L,2
1. <DATAID>
2. <DATALENGTH>
Equipment to host: S2F40
Structure: <GRANT >
B. Equipment Initiated - Not applicable.
GEM Manual for DEK Printers SECS II Implementation
Issue 1.1 March 20th, 2014 Page 76 of 152 Page 76 of 152
S2F41 Host Command Send (HCS)
S2F42 Host Command Acknowledge (HCA)
Description: The host requests the equipment to perform the specified remote
command. Valid commands and parameters are listed at appendix A.
A. Host Initiated
Host to equipment: S2F41
Structure: L,2
1. <RCMD>
2. L,n ;n = No. of parameters
1. L,2
1. <CPNAME1>
2. <CPVAL1>
.
.
n. L,2
1. <CPNAMEn>
2. <CPVALn>
Equipment to host: S2F42
Structure: L,2
1. <HCACK>
2. L,n ;n = No. of Bad parameters.
1. L,2
1. <CPNAME1> parameter 1 name
2. <CPACK1> parameter 1 reason
.
.
n. L,2
1. <CPNAMEn>
2. <CPACKn>
B. Equipment Initiated - Not applicable.