Nordson_EFD_RV_Series_Operating_Manual.pdf - 第87页

RV Series Automated Dispensing Systems 87 www.nordsonefd.com info@nordsonefd.com +1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide. PICO Toµch Controller settings editable throug…

100%1 / 146
RV Series Automated Dispensing Systems
86 www.nordsonefd.com info@nordsonefd.com +1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide.
How to Adjust PICO Parameters Using DispenseMotion
You can use the DispenseMotion software to remotely edit the parameters of a connected PICO Toµch Controller.
Edited parameters are stored as *.pico files on the DispenseMotion Controller. The PICOTouch Parameter Update
command is then added to a dispense program to implement the settings saved in a *.pico file.
PREREQUISITES
A PICO Pµlse
®
valve and Toµch
™
Controller system is properly installed and connected to the automated
dispensing system.
To Create a New PICO File
# Click Step Reference Image
1
>
• Click PROGRAM > PICO TOUCH to open the
Pico Touch Remote Control window.
2 • Click the tab for the settings you want to edit (Valve, Heaters, or Ramp).
3
>
• Click the button for the parameter you want to edit and enter the desired setting.
Refer to the PICO Toµch Controller Operating Manual for details on settings.
• Click SAVE.
NOTES:
- The first time you save, the system prompts for a file name. PICO files are saved
on the DispenseMotion controller as *.pico files under D:\Save\PICO. You can
use any allowable file name, but Nordson EFD recommends using a numeric
name to make it easier to enter the file name in a PicoTouch Parameter Update
command.
- After you click Save, the Toµch Controller screen updates in real time (after a
slight delay).
- Refer to “PICO Toµch Controller settings editable through the DispenseMotion
software” on page87 for screen captures that show the Toµch Controller
settings you can edit.
• Continue making selections and saving until all desired settings are entered.
4
X
• To exit, close the Pico Touch Remote Control window.
5
• To use the PICO Toµch settings in a program, continue to “To Use the PicoTouch
Parameter Update Command in a Program” on page88.
RV Series Automated Dispensing Systems
87www.nordsonefd.com info@nordsonefd.com +1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide.
PICO Toµch Controller settings editable through the DispenseMotion software
To Edit an Existing PICO File
# Click Step Reference Image
1
>
• Click PROGRAM > PICO TOUCH to open the
Pico Touch Remote Control window.
2 • Click OPEN and then open the file you want to edit.
3
• Click the tab for the settings you want to edit (Valve, Heaters, or Ramp).
4
>
• Click the button for the parameter you want to edit and enter the desired setting.
Refer to the Toµch Controller Operating Manual for details on settings.
• Click SAVE AS.
NOTE: Every time you make a change and click SAVE AS, you will have to overwrite
the existing file or create a new file.
• Continue making selections and saving until all desired settings are entered.
5
X
• To exit, close the Pico Touch Remote Control window.
6
• To use the PICO Toµch settings in a program, continue to “To Use the PicoTouch
Parameter Update Command in a Program” on page88.
How to Adjust PICO Parameters Using DispenseMotion (continued)
RV Series Automated Dispensing Systems
88 www.nordsonefd.com info@nordsonefd.com +1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide.
To Use the PicoTouch Parameter Update Command in a Program
PREREQUISITES
A PICO Toµch Controller is properly installed and connected to the automated dispensing system.
The PICO Toµch parameters are saved in a *.PICO file as described in the previous two procedure.
# Click Step Reference Image
1
>
PICOTOUCH
PARAMETER
UPDATE
• Click the PROGRAM tab
• Double-click the address row where you want
to implement the saved PICO Toµch Controller
settings and select PICOTOUCH PARAMETER
UPDATE.
2 xxxxxxxx • In the FILE NUMBER field, enter the *.pico file
name that contains the PICO Toµch parameters
you want the system to use.
NOTE: The data entered for File Number must
exactly match the *.pico file name.
• Click OK to save.
NOTE: Multiple PicoTouch Parameter Update
commands can exist in the same program. When
the system switches to a new update command,
the Toµch Controller screen updates as well.
Note that delays can occur when switching
programs, for both the running program and the
update of the Toµch Controller screen.
How to Adjust PICO Parameters Using DispenseMotion (continued)