Nordson_EFD_RV_Series_Operating_Manual.pdf - 第92页
RV Series Automated Dispensing Systems 92 www.nordsonefd.com info@nordsonefd.com +1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide. Accessories (continued) Fixtur e Plates All pl…
RV Series Automated Dispensing Systems
91www.nordsonefd.com info@nordsonefd.com +1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide.
Accessories
NOTE: For replacement parts, refer to the maintenance and parts guide, available at www.nordsonefd.com/
RobotMaintenanceGuide.
Safety Enclosures
Nordson EFD guarded safety enclosures integrate seamlessly with our complete line of
automated dispensing systems. Featuring external dispensing controls, a safety light curtain,
and an internal electrical control box and wireways for faster, safer setup, these CE-compliant
enclosures also fully comply with EU Machinery Directive 2006/42/EC.
Part # Description Compatible Robot Models
7362738 Small safety enclosure
R3V
7362766 Small safety enclosure, Europe
7362739 Large safety enclosure
R4V
7362767 Large safety enclosure, Europe
Pre-Configured Output Cables
Item Part # Description
7360551 Standard cable to connect the dispenser and the robot
7360761
Single voltage initiate cable to connect the dispenser and the robot
(provides different pigtails to connect to different dispensers /
controllers)
7360554
Dual voltage initiate cable to connect up to two dispensers / controllers
to the robot
:
7362573
I/O interface cable between the ValveMate
™
8000 and the robot when
the use of all four (4) ValveMate 8000 channels are required
7360558
Dual-connector cable to connect up to two PICO Toµch controllers to
the robot
7362356
Dual-connector cable to connect up to two Liquidyn
®
V10 controllers to
the robot
7362357
Dual-connector cable to connect up to two Liquidyn V200 controllers to
the robot
7362373
Single-connector cable to connect a Liquidyn V200 controller to the
robot
RV Series Automated Dispensing Systems
92 www.nordsonefd.com info@nordsonefd.com +1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide.
Accessories (continued)
Fixture Plates
All plates include four edge levelers and four leveling mounts.
Part # Description
7362547 300mm fixture plate
7362548 400mm fixture plate
7362549 600mm fixture plate
Start / Stop Box
The start / stop box accessory facilitates input / output connections for remote functions, such as an start or
emergency stop button. Refer to “Example Input / Output Connections” on page97 for schematics.
Item Part # Description
7363285
Start / stop accessory box and I/O checker, standard
The I/O checker allows a user / programmer to simulate either (1)
input signals from external devices or (2) outputs from the automation
before physically installing any external devices.
7360865 Start / stop accessory box, European Community
Tip Detection Kits
The optional tip detector or tip alignment devices allow you to automatically update both the XY offsets and the
Zheight by clicking on Needle Z Detect. The Needle Z Detect button is present only on systems that include a tip
detection device. Refer to “Setting Up the Optional Tip Detector or Tip Alignment Device” on page125 to set up
the tip detector.
Item Part # Description
7360893 Tip detector accessory kit, EV, RV Series
7362353
Tip alignment accessory kit, R, RV Series
The tip alignment device performs the same function as the standard
tip detector, but without requiring the tip to touch a sensor. This
device should be installed if the workpiece is 15mm (0.6"), or more,
higher than the tip detector.
7363940
Top mount / under mount accessory kit
This kit allows you to mount the tip detector in the center of the robot
fixture plate, either on top of the plate or under the plate, to facilitate
multi-needle or other applications.
RV Series Automated Dispensing Systems
93www.nordsonefd.com info@nordsonefd.com +1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide.
Item Part # Description
7360610
Syringe barrel mounting
bracket
7361815
Mounting bracket for PICO
Pµlse valves
7360613
Mounting bracket for all
valves with mounting holes
(752, 725, 741, 736, 781,
787, and 782 Series valves)
7361758
Universal valve mounting
bracket for all valves
without mounting holes
(702, 754, 794, and 784S-
SS Series valves)
Mounting Brackets
Item Part # Description
7363518
Mounting bracket for 794-
TC Series valves
7361114
Mounting bracket for
xQR41 and 745 Series
valves
7362177
Mounting bracket for
Liquidyn P-Jet and P-Dot
valves
Accessories (continued)
OptiSure Software Key
Nordson EFD’s OptiSure Automated Optical Inspection (AOI) software is available within the current DispenseMotion
software as an optional add-on. The AOI feature inspects fluid deposit widths and diameters with exceptional
certainty and determines if dispense requirements have been met. The OptiSure feature also includes advanced
functions for augmenting mark images to make them easier for the system find.
Item Part # Description
7365229 Software key, OptiSure Automated Optical Inspection (AOI)