00198171-02_Technical_Training_FSE_TX-Series_EN.pdf - 第150页

9 Station Software Overviews 9.7 Maintenance GUI 150 Technical Training FSE SIPLACE TX-Series 01/2018 Verification – Feeder Verification This function is to verify the feeder pick up posi- tion at the machine. The machin…

9 Station Software Overviews

9.7 Maintenance GUI

Technical Training FSE SIPLACE TX-Series 01/2018 149

Verification – Conveyor Rail Verification

This function check the parallelism of the con-

veyor rails with the PCB cameras and the outer

edge of each rail in the placement area.

Verification – Conveyor Motor Verification

This function to verify the transport motors de-

pending on the current and the defined limits.

Example/ Extract of the report.

Verification – Power Supply (SMPS)

This is the common function for the power sup-

ply (SMPS) and is available for X-Series S and

SX machine with X-module upgrade and all TX

machine.

9 Station Software Overviews

9.7 Maintenance GUI

150 Technical Training FSE SIPLACE TX-Series 01/2018

Verification – Feeder Verification

This function is to verify the feeder pick up posi-

tion at the machine.

The machine takes a picture of the real pickup

position without offsets, so that the user can see

if the drive system matches the pickup position.

9 Station Software Overviews

9.7 Maintenance GUI

Technical Training FSE SIPLACE TX-Series 01/2018 151

9.7.4.1 Power Supply Diagnostics GUI

The diagnostics function can be accessed as follows:

1. Click on to the maintenance GUI icon

2. Click on Verification icon

3. Click on the "Power supply" button and the

main menu opens

This window shows the diagnostics data main view:

1. Main view SMPS data from PS1 and CAP1

2. CSB shows the status of all safety signals

from the safety breaker

3. Data for the 160 VDC

4. Data for the 42 VDC

5. Data for the 28 VDC

6. Data for the 24 VDC

7. Data for PS1 and CAP1

If the start button has not yet been pressed, there is no switched voltage present here yet and the

switched voltages icons are highlighted red:

1. Overview voltages status

2. Number of voltage drops since last reset

3. Reset voltage drop counter

NOTICE

All signals or voltages which are interrupted when pressing the emergency stop button or

opening the machine covers will be counted by the voltage drop counter.