00198171-02_Technical_Training_FSE_TX-Series_EN.pdf - 第32页
3 Setting Up the Machine Room for Your Sketches and Notes 32 Technical Training FSE SIPLACE TX-Series 01/2018 Room for Your Sketches and Notes
3 Setting Up the Machine
3.3 Setting up the TX Machine – Tools
Technical Training FSE SIPLACE TX-Series 01/2018 31
3.3 Setting up the TX Machine – Tools
TX series
Tools Number
Torque wrench 100 Nm to 400 Nm Setting 130Nm required. 03122973-xx
Tool holder for reversible ratchet 800mm 03122976-xx
Attachable ratchet 3/4 inch 14x18 03122977-xx
Extension 1/2 inch 03080499-xx
Allen Key bit SW19x85mm 3/4 inch 03122975-xx
UVEX bump cap SHORT 03122979-xx
Hexagonal screwdriver bit, size 14 Standard tooling
Open-end wrench 18 mm Standard tooling
Shaft spirit level (accuracy 0.02 mm/m), 00353825-xx
Only Micron
ACT case(standard) TX micron 20 / 25µm 03072228-xx
Accuracy Checking Tool ACT 03068036-xx
Mapping plate, single set, cpl. 03056448-xx
ACT adhesive tape 03071883-xx
Ceram Pads 2x2mm (TAPE) 00359505-xx
User Man. Accuracy Checking Tool, DE+EN 00196351-xx
ACT case TX micron 15µm xxxxxxxx-xx
Accuracy Checking Tool ACT 15µm xxxxxxxx-xx
ACT-Plate TX micron xxxxxxxx-xx
Adhesive foil ACT TX micron xxxxxxxx-xx
Ceramic pads 2x2mm unfurl 00359505-xx
ACT-paket TX2i micron 15µm
●
ACT-test-dummy 250x100x3
●
ACT-paket complete TX2i micron 15µm
03156157-xx
●
03156158-xx
●
03156305-xx
VakTool ACT SP1 complete 03156327-xx
VakTool ACT SP2 complete 03156332-xx
Pipette Typ 4204/6204 complete ceramic 03149000-xx
Nozzle magazine type 40xx 03101503-xx
Pipette 2204 complete ceramic 03153518-xx
Nozzle magazine type 20xx 03066107-xx
3.4 Excercise: Setting up the machine
1. Which answer is incorrect relating to machine delivery and setup?
A The two component tables are packaged with the TX machine in one box.
B To move the machine the forklift truck can lift and move machine by any orientation.
C TX machine transport height: 900mm to 950mm ± 15mm.
D The first 4 items in the “automatic calibration” GUI should be calibrated after machine install-
ation.
3 Setting Up the Machine
Room for Your Sketches and Notes
32 Technical Training FSE SIPLACE TX-Series 01/2018
Room for Your Sketches and Notes
3 Setting Up the Machine
Room for Your Sketches and Notes
Technical Training FSE SIPLACE TX-Series 01/2018 33