00198171-02_Technical_Training_FSE_TX-Series_EN.pdf - 第24页
2 Machine Basic Overview Room for Your Sketches and Notes 24 Technical Training FSE SIPLACE TX-Series 01/2018 Room for Your Sketches and Notes
2 Machine Basic Overview
2.7 Excercise: TX Machine Basic Overview
Technical Training FSE SIPLACE TX-Series 01/2018 23
D A, B and C configurations are all correct.
2. What is the correct answer?
A 80 pcs of 8 mm feeder can be setup on a TX machine with 2XCP20 P Head configuration.
B A stationary camera can be in installed at both locations for TX machine.
C The docking unit always in inner position in location 2 for TX machine.
D JTF-ML can be installed in location 2 for TX machine.
3. What option is not possible in a TX machine?
A Reject plate.
B Stationary camera for Twin Head or CPP in Location 1.
C Long Board option.
D Second fiber optic sensor for second board stop in placement area.
4. What are the differents between TX and TX micron machine?
A Differences are only in the machine specification.
B The TX micron has a more accurate specification and more accurate placement heads.
C The machines have different software versions.
D The TX micron does not support the TX shuttle.
2 Machine Basic Overview
Room for Your Sketches and Notes
24 Technical Training FSE SIPLACE TX-Series 01/2018
Room for Your Sketches and Notes
2 Machine Basic Overview
2.8 Featchers to Achieve high Accuracy with the TX micron
Technical Training FSE SIPLACE TX-Series 01/2018 25
2.8 Featchers to Achieve high Accuracy with the TX micron
Measurement scales of main axis are glass scales with very low coefficient of thermal expansion
(CTE) instead of metal scales.