00198171-02_Technical_Training_FSE_TX-Series_EN.pdf - 第3页
3 Technical Training FSE SIPLACE TX-Series 01/2018 Table of Contents Table of Contents 1 Machine Safety .. 7 1.1 Machine Safety .. 7 1.2 Warning Labels - General .. 8 1.3 High temperatures related to C&P20 A/M/…
All names identified by ® are registered trademarks of ASM Assembly Systems GmbH & Co. KG. The remaining
trademarks in this publication may be trademarks whose use by third parties for their own purposes could violate
the rights of the owner.
We have reviewed the contents of this publication to ensure consistency with the hardware and software de-
scribed. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the informa-
tion in this publication is reviewed regularly and any necessary corrections are included in subsequent editions.
Copyright © ASM Assembly Systems Technical data subject to change
ASM Assembly Systems GmbH & Co. KG
Rupert-Mayer-Strasse 44
81379 Munich
Germany
Item no.: 00198171-02
www.asm-smt.com Printed by ASM Assembly Systems
3Technical Training FSE SIPLACE TX-Series 01/2018
Table of Contents
Table of Contents
1 Machine Safety.. 7
1.1 Machine Safety.. 7
1.2 Warning Labels - General.. 8
1.3 High temperatures related to C&P20 A/M/P/M2 Head, X-Feeder 8mm and Smart-
Feeder 4mmX / 8mmX.. 9
1.4 High temperature related to MHCU.. 9
1.5 ESD Guidelines.. 9
1.6 Excercise: Machine Safety.. 10
2 Machine Basic Overview.. 13
2.1 Introduction.. 13
2.2 Machine Overview.. 14
2.3 Overview main components.. 16
2.4 Machine Configuration.. 19
2.5 Special Features.. 21
2.6 Configuration Help.. 22
2.7 Excercise: TX Machine Basic Overview.. 22
2.8 Featchers to Achieve high Accuracy with the TX micron.. 25
3 Setting Up the Machine.. 27
3.1 Setting up the TX Machine.. 27
3.2 Setting up the TX Machine - Calibrations.. 29
3.3 Setting up the TX Machine – Tools.. 31
3.4 Excercise: Setting up the machine.. 31
4 Gantry System.. 35
4.1 Overview.. 35
4.2 Reference Run.. 36
4.3 Calibration after Repair and Adjustment.. 39
4.3.1 Explanation of main Gantry Calibrations.. 39
4.3.2 Conducting Calibrations.. 40
4.4 PCBs.. 41
4.5 Control and Communication Overview.. 42
4.5.1 Gantry System - Travel Ranges and Speed Monitoring.. 44
4.6 Analyze.. 45
4.7 Main Parts Exchange / Setting / Calibration.. 45
4.8 Gantry System and Base Machine - Overview Maintenance.. 45
4.9 Excercise: TX Gantry System.. 46
5 Component Supply.. 49
5.1 Change Over Table (COT).. 49
5.1.1 Location.. 49
5.1.2 Overview COT.. 49
5.1.3 COT Feeder Configuration.. 50
5.1.4 Height Adjustment.. 50
4 Technical Training FSE SIPLACE TX-Series 01/2018
Table of Contents
5.2 Docking Station and COT Insert.. 51
5.3 Feeder Control Unit (FCU).. 52
5.4 Tape Cutter.. 53
5.5 Reject plate on TX.. 54
5.6 Component Supply Pneumatic & Electrical System.. 55
5.6.1 Overview Pneumatic System.. 55
5.6.2 Overview Electrical System.. 56
5.7 Nozzle Changer for C&P20 P/M2 / CPP and Twin Heads.. 57
5.7.1 Nozzle Changer Twin Head.. 58
5.8 Analysis - Common Error List.. 58
5.9 Excercise: Component Supply.. 59
6 Conveyor System.. 63
6.1 Main Overview.. 63
6.2 Specification.. 64
6.3 Conveyor Functionality.. 65
6.3.1 TX Board monitoring and clamping.. 65
6.3.2 Width adjustment.. 67
6.3.3 Reference run.. 68
6.3.4 PCB convoy mode.. 69
6.4 Overview Conveyor Electrical System.. 70
6.5 Parts Exchange / Settings / Calibration.. 71
6.5.1 Parts Exchange / Adjustment or Setting.. 71
6.5.2 Calibration after Repair / Adjustment.. 73
6.5.2.1 Explanation of the conveyor calibrations.. 73
6.5.2.2 Calibrating the motor (Lifting)/ Checking the motor current (Lifting/ Transport/ Width).. 73
6.5.2.3 Calibrating the conveyor width.. 74
6.5.2.4 Board reference corner.. 76
6.5.2.5 Teaching the sensor.. 77
6.5.2.6 Adjust Shuttle.. 78
6.5.3 Changing the Conveyor Configuration.. 79
6.5.3.1 Changing the fixed conveyor rail width positions.. 79
6.5.3.2 Adjusting the fixed rail: Outer/ Right/ Left.. 80
6.5.3.3 Conveyor Settings in SIPLACE Pro and GUI.. 80
6.6 Analysis - Common Error List.. 81
6.7 Maintenance.. 81
6.8 Excercise: Conveyor System.. 82
7 Power Supply .. 85
7.1 Overview of the Switched Mode Power Supply SMPS.. 85
7.2 Wiring colour description.. 87
7.3 Voltage Overview Block diagrams.. 89
7.3.1 Circuit Diagram of Power Supply TX.. 89
7.3.2 300 V Intermediate Circuit Voltage for Main Axes.. 90
7.3.3 160 V Intermediate Circuit Voltage for Head Axes.. 91
7.3.4 42 VDC Switched and Unswitched.. 92
7.3.5 24 VDC Switched and Unswitched.. 93
7.3.6 28 VDC Unswitched.. 95
7.4 CAP Function Description.. 96
7.5 Overview of Fuse board FD:A1.. 97