00198171-02_Technical_Training_FSE_TX-Series_EN.pdf - 第6页
6 Technical Training FSE SIPLACE TX-Series 01/2018 Table of Contents 10 JTF-ML .. 157 10.1 JTF (JEDEC Tray Feeder) - General Overview .. 157 10.2 JTF (JEDEC Tray Feeder) - Technical Data .. 157 10.3 JTF (JEDEC Tray…
5Technical Training FSE SIPLACE TX-Series 01/2018
Table of Contents
7.6 Function Description of Individual Assemblies SMPS TX.. 98
7.6.1 Main switch.. 98
7.6.2 Power Pack PS1-(330 VDC/ 160 VDC).. 98
7.6.2.1 Power Supply(SMPS) – Safety Indication.. 99
7.6.3 CAP1 - Capacitor Battery (Backup Capacitor).. 100
7.6.4 Power Pack PS2-PS3 and PS4.. 100
7.6.5 Power Supply (SMPS) - Measuring & Testing 300VDC.. 101
7.7 SMPS diagnostic.. 102
7.8 Safety control.. 102
7.9 Cable harness interface.. 105
7.10 I / O Control Unit Distributor.. 107
7.11 Analysis - Common Error List.. 110
7.12 US option.. 112
7.13 Pneumatic System Overview.. 113
7.14 Excercise: Power Supply.. 114
8 Control and Communication.. 119
8.1 Communication Complete Overview.. 119
8.2 Machine Communication bus Overview.. 119
8.3 MGCU and MHCU.. 122
8.4 Box PC (Control Computer).. 123
8.5 CIN Box.. 123
8.6 Network Construction.. 124
8.7 Axis Control.. 125
8.8 FCU.. 125
8.9 Feeder Communication.. 127
8.10 VISION GigE.. 127
8.11 Analysis - Common Error List.. 130
8.12 Excercise: Control and Communication.. 131
9 Station Software Overviews.. 135
9.1 Station Software Start Page Overview.. 135
9.2 Overview Station Software Main Menus.. 135
9.3 User management and activity level rights.. 137
9.4 Editing a board with the station software.. 139
9.5 Machine Settings and Options Overview.. 140
9.6 Machine Software Options Overview.. 141
9.7 Maintenance GUI.. 142
9.7.1 General Maintenance GUI.. 142
9.7.2 Preventive Maintenance.. 142
9.7.3 Predictive Maintenance.. 145
9.7.4 Verification.. 146
9.7.4.1 Power Supply Diagnostics GUI.. 151
9.8 Embedded software (eSW) download.. 152
9.9 Station GUI Shuttle Extension.. 153
9.10 Excercise: Station Software Overviews.. 153
6 Technical Training FSE SIPLACE TX-Series 01/2018
Table of Contents
10 JTF-ML.. 157
10.1 JTF (JEDEC Tray Feeder) - General Overview.. 157
10.2 JTF (JEDEC Tray Feeder) - Technical Data.. 157
10.3 JTF (JEDEC Tray Feeder) - Operation .. 158
10.3.1 Overview.. 158
10.3.2 Button Description.. 159
10.3.3 LED indication.. 159
10.4 JTF (JEDEC Tray Feeder) - Power and Communication.. 160
10.5 JTF (JEDEC Tray Feeder) - Adjustment.. 161
10.6 Analysis - Common Error List.. 162
10.6.1 General.. 162
10.7 Maintenance.. 163
10.8 Excercise: JTF-ML.. 164
1 Machine Safety
1.1 Machine Safety
Technical Training FSE SIPLACE TX-Series 01/2018 7
1 Machine Safety
1.1 Machine Safety
CAUTION
Any persons working on the machine must be familiar with the safety instructions in the
user manual and observe this at all times. The following safety instructions are only an ex-
cerpt from the chapter "Operational Safety" in the SIPLACE user manual. For further de-
tailed safety information please refer to the User Manual that was supplied with your
machine. Please pay attention to the safety instructions as delivered by our instructor.
TX buttons and switches
1. Emergency stop button
2. Stop and start buttons
3. Button for docking and undocking the
component trolley at the respective loca-
tions
NOTICE
DO NOT use the emergency stop button to stop the machine unless in emergency
situation! Use only the stop button (black) for general machine stop!
Permanent magnets symbol
●
Risk of death for persons with active
implants (e.g. pacemakers, insulin
pumps, defibrillators).
●
Danger of crushing for persons with
passive metal implants (e.g. plates,
screws).
●
Do not reach into the machine or bend
towards it when the protective covers
are open.
●
Do not bring any metal objects into the
area.