00198171-02_Technical_Training_FSE_TX-Series_EN.pdf - 第23页
2 Machine Basic Overview 2.7 Excercise: TX Machine Basic Overview Technical Training FSE SIPLACE TX-Series 01/2018 23 D A, B and C configurations are all correct. 2. What is the correct answer? A 80 pcs of 8 mm feeder ca…
2 Machine Basic Overview
2.6 Configuration Help
22 Technical Training FSE SIPLACE TX-Series 01/2018
2.6 Configuration Help
2.7 Excercise: TX Machine Basic Overview
1. Which is the best answer regarding TX machine types?
A A two gantry is a possible configuration for TX machines, It is called TX2.
B A two gantry machine with inner table positions is a possible configuration for TX machines,
It is called TX2i.
C One gantry is a possible configuration for TX machines, It is called TX1.
2 Machine Basic Overview
2.7 Excercise: TX Machine Basic Overview
Technical Training FSE SIPLACE TX-Series 01/2018 23
D A, B and C configurations are all correct.
2. What is the correct answer?
A 80 pcs of 8 mm feeder can be setup on a TX machine with 2XCP20 P Head configuration.
B A stationary camera can be in installed at both locations for TX machine.
C The docking unit always in inner position in location 2 for TX machine.
D JTF-ML can be installed in location 2 for TX machine.
3. What option is not possible in a TX machine?
A Reject plate.
B Stationary camera for Twin Head or CPP in Location 1.
C Long Board option.
D Second fiber optic sensor for second board stop in placement area.
4. What are the differents between TX and TX micron machine?
A Differences are only in the machine specification.
B The TX micron has a more accurate specification and more accurate placement heads.
C The machines have different software versions.
D The TX micron does not support the TX shuttle.
2 Machine Basic Overview
Room for Your Sketches and Notes
24 Technical Training FSE SIPLACE TX-Series 01/2018
Room for Your Sketches and Notes