User Manual SIPLACE MeasuringFeeder X.pdf - 第8页
1 Introduction 1.2 Important Notes about this Manual 8 User Manual SIPLACE MeasuringFeeder X 03/2020 1.2.5 Further Information 1.2.5.1 How To Get Information If you have any questions about this manual or if you would li…
1 Introduction
1.2 Important Notes about this Manual
User Manual SIPLACE MeasuringFeeder X 03/2020 7
1.1.7 Electromagnetic compatibility (EMC)
All SIPLACE products are designed and tested for professional use in industrial applications. Elec-
tromagnetic compatibility in terms of the emission of interference cannot be guaranteed in any
other environment.
1.1.8 Use of original accessories and spare parts
Only use original spare parts and authorized accessories. The use of other parts will affect safety
and will invalidate the liability for any consequential damage.
1.2 Important Notes about this Manual
1.2.1 Contents and Filing of this Manual
This User Manual contains basic information that must be observed when setting up, operating and
maintaining the module. The service engineers, qualified staff, operators and users must therefore
read it before commencing installation and commissioning. The instructions must be kept perman-
ently accessible wherever the module is used.
In addition, the user must ensure that the employees have fully understood the contents of the user
manual.
1.2.2 Danger notes
WARNING
Danger notes
► Work may only be performed on the SIPLACE MeasuringFeeder X if the personnel
concerned have a thorough knowledge of the relevant section of the user manual.
► All work must be carried out by appropriately trained and qualified personnel.
► All warnings, cautions and hazard notes must be observed.
► Carefully read through the chapter on operational safety for this purpose.
1.2.3 Manufacturer's/supplier's liability
We draw your attention to the fact that these instructions only contain descriptive and explanatory
material and do not include any contractual conditions or undertakings. All obligations of ASM
Assembly Systems GmbH & Co. KG are conclusively specified in the respective contract, on the
basis of which you have received the machine described therein. This applies in particular to all
statements regarding performance or service life and the agreed liability for faults or defects. The
provisions of the contract regarding the liability for faults or defect are neither extended nor restric-
ted by any statements in this manual.
1.2.4 Release History
Document
SIPLACE MeasuringFeeder X
User Manual
Edition Changes
12/2018
11/2019
03/2020
First edition
Revised chapter 4.1.6 on special nozzles
Revised chapter 3.1, Footnote for capacitor measurement ranges
1 Introduction
1.2 Important Notes about this Manual
8 User Manual SIPLACE MeasuringFeeder X 03/2020
1.2.5 Further Information
1.2.5.1 How To Get Information
If you have any questions about this manual or if you would like more information about certain
subjects, please contact your local SIPLACE branch or us directly:
ASM Assembly Systems GmbH & Co. KG
Rupert-Mayer-Str. 44
81379 München
1.2.5.2 SIPLACE on the World Wide Web (WWW)
Log in to our SIPLACE® homepage at http://www.asm-smt.com.
You can choose between the German and English version.
The different sections contain information about our products, services and contact persons.
In addition, registered customers can also access the MySIPLACE user group. Here you can call
up special information about our placement systems, e.g.
●
technical documentation
●
technical information
●
spare parts lists etc.
Registration for the MySIPLACE user group is very simple:
► At the head of the web site, click on and then on the Register
link.
► Fill in the registration form and send it off to us.
Soon afterwards, you will receive your access authorization with user name and password.
2 Operational Safety
2.1 Safety Instructions
User Manual SIPLACE MeasuringFeeder X 03/2020 9
2 Operational Safety
2.1 Safety Instructions
DANGER
Nonobservance of these safety instructions may cause injury to personnel and dam-
age to the machine!
► Please observe the safety instructions in the user manual of the relevant machine
for all work!
2.1.1 Conventions for the use of safety instructions and symbols
Safety instructions
This manual contains notes that must be observed to guarantee your personal safety and to avoid
damage to equipment. These notes are highlighted by warning triangles and are indicated as fol-
lows according to the level of risk:
DANGER
Definition
For the purposes of this manual, this indicates that fatal or severe injuries or considerable
damage to property will occur if this hazard warning is not observed.
WARNING
Definition
For the purposes of this manual, this indicates that fatal or severe injuries or considerable
damage to equipment may occur if these warning instructions are not followed.
CAUTION
Definition
For the purposes of this manual, this indicates that minor injuries or damage to property
may occur if this caution is not observed.
NOTICE
Definition
For the purposes of this manual, this note provides information about the product or indic-
ates a part of the manual that requires particular attention.
Symbols
Example Description
Next This typeface marks controls and interface elements in the software.
► This symbol indicates actions that have to be performed by the operator.
2.1.2 Staff Qualifications and Training
Qualified or adequately trained personnel means that these people are familiar with the setting up,
operation and maintenance and are suitably qualified, e.g.:
●
Have been trained, instructed or authorized to switch on and off, isolate, earth and identify
electrical circuits and system components in accordance with normal safety standards.
●
Have been trained or instructed in the upkeep and use of appropriate safety equipment in
accordance with normal safety standards.
●
Have received first aid training.