JO-109-002_JG-0209.pdf - 第131页
4-43 JO-109 1005-001 2.4 Attachment and Detachment of Master T apes (SL) 2.4 Attachment and Detachment of Master T apes (SL) 2.4.1 Attachment of Master T apes (SL) (1) Remove the tape guide. Remove the M2.5 countersunk s…
4-42
JO-109
1005-001
2.3 Attachment and Detachment of Master Tapes
(7) Push down the upper area of the end hook with the suppressor(s)
being lowered and secure the suppressor(s).
GT-08080 GT-12160
Fig. D54 Tape Feeders Equipped with Master Tapes
2.3.2 Detachment of Master Tape(s)
Procedure
(1) While slightly pushing down the suppressor end(s) of the tape
feeder with your nger, press the lower area of the end hook and
lift up the suppressor(s).
(2) Pull out the master tape(s).
(3) Slowly lower the suppressor(s).
(4) Push down the upper area of the end hook with the suppressor(s)
being lowered and secure the suppressor(s).
CAUTION
The master tapes are made of a thin metal. Carefully
handle the tapes to avoid cutting your nger with the
tape edges.
4-43
JO-109
1005-001
2.4 Attachment and Detachment of Master Tapes (SL)
2.4 Attachment and Detachment of Master Tapes (SL)
2.4.1 Attachment of Master Tapes (SL)
(1) Remove the tape guide.
Remove the M2.5 countersunk screw
fixing the tape guide (2 locations)
After a tape guide removed.
Fig. D61
(2) Conrm that no foreign substances ( chip components, dirt, dust,
etc.) adheres to the chute and underside of the suppressor.
CAUTION
When the master tapes are attached with some
foreign substances being adhered, the suppressors
and master tapes may be deformed, causing an
inaccurate measurement of the pickup position.
(3) Lift up the suppressor and master tape insert from tip of SL
feeder.
Insert master tape from tip of SL feeder.
Slide up the suppressor.
Fig. 62
Procedure
4-44
JO-109
1005-001
2.4 Attachment and Detachment of Master Tapes (SL)
(4) Attach the master tape to the chute section so that the tape feed
holes can be engaged properly with the sprocket pins.
(5) Conrm that no foreign substances (chip components, dirt, dust,
etc.) are scattered on the master tape.
Equipped with Master Tape
Fig D63, SL Feeder Equipped with Master Tapes.
2.4.2 Detachment of Master Tapes (SL)
(1) Pull out the master tape
(2) Slowly slide down the suppressor.
(3) Attachment the tape guide
Keep slightly pushing the tape guide to
the feeder frame and attach the tape guide.
Fig. D64
(4) Conrm Slide up to down the suppressor by hand and conrm
that the suppressor moves smoothly.
CAUTION
The master tapes are made of a thin metal. Carefully
handle the tapes to avoid cutting your nger with the
tape edges.