JO-109-002_JG-0209.pdf - 第57页
3-5 JO-109 1.2 Password Change 1005-001 (6) When a new password matches one entered in the "Conrmation" textbox, the "Password Change" dialog box opens. Press the [OK] button to change the password(s…
3-4
JO-109
1.2 Password Change
1005-001
(4) When the entered password matches the previously stored
password, the "Password" window appears, enabling you to
change the password.
(
When a wrong password is entered, nothing appears.)
Fig. C6
(5) Tick the "New Password (Administrator)" check box and enter a
new password.
Enter the same password in the "Conrmation" text ox for the
conrmation and press the [OK] button
Note
Follow the same procedure for "Power User".
Both passwords (for "Administrator" and "Power User") can
also be changed at the same time.
Fig. C7
3-5
JO-109
1.2 Password Change
1005-001
(6) When a new password matches one entered in the "Conrmation"
textbox, the "Password Change" dialog box opens. Press the [OK]
button to change the password(s).
Fig. C8
Notice
•
When a check box is not ticked, the password entered in the
corresponding text box becomes invalid.
•
When the text box is left blank (no characters entered), it is
also regarded as a password.
•
When the same password is used for both "Administrator"
and "Power User", it is regarded as one for "Administrator".
•
Enter only alphanumeric characters.
Note that passwords are always case sensitive (sensitive to
uppercase and lowercase letters).
•
Up to 16 alphanumeric characters can be entered.
3-6
JO-109
2. Set Data Change
1005-001
2. Set Data Change
"Administrative Authority" is required to change the set values, except for
type selection and master setting.
Reference
Refer to "1. Administrative Authority Change" in "Section 3" for details.
A different window for data entry appears according to the data type of the
set value.
"Numerical Value Entry" Window
When a set value is numerical, this window appears.
Interrupts the change process.
Name of Program for Set Value Change
Entered Value
Deletes the entered value.
Deletes a character to the
left of the cursor.
Applies the entered value.
Fig. C9 "Numerical Value Entry" Window