JO-109-002_JG-0209.pdf - 第19页

JO-1 16 Safe-1 1 1 105-001 4. Alert Indications in Instruction Manual Alert Indications described as " CAUTION " (continued) Alert Description Related Items Avoid getting your nger caught in the toggle clamp w…

100%1 / 175
JO-116
Safe-10
4. Alert Indications in Instruction Manual
1105-001
Alert Indications described as "
CAUTION
"
Alert Description Related Items
•
At least two people are needed to install the feeder adjusting
jig and the personal computer box.
The jig is very heavy. Be sure not to drop it. Otherwise, your
hands and/or feet will get hurt or the jig may be damaged.
•
Carefully handle the jig and the personal computer box to avoid
your nger being caught in the base.
Otherwise, you may receive a hand or foot injury.
Section 2
1. Procedure for
Jig Installation
•
The jig origin master is very heavy. Be sure not to drop it.
Otherwise, your feet will get hurt or the jig may be damaged.
•
The LED illumination unit uses a Cass 2 laser beam. Do not
expose your eyes directly the laser radiation. Otherwise, your
eyes will be injured.
Section 4
1. Registration of
Master Position
(Jig Origin
Adjustment)
•
Be sure not to drop any tape feeder. Otherwise, your feet will
get hurt or the feeder may be damaged.
Carefully handle each tape feeder and never drop any.
•
When you install a tape feeder on the adjustment base, avoid
getting your ngers caught between the end of the feeder and
the adjustment base and the connectors.
•
The master tapes are made of a thin metal. Carefully handle
the tapes to avoid cutting your nger with the tape edges.
Section 4
2. Feeder
Measurement
Safety Precautions
JO-116
Safe-111105-001
4. Alert Indications in Instruction Manual
Alert Indications described as "
CAUTION
" (continued)
Alert Description Related Items
Avoid getting your nger caught in the toggle clamp while
fastening the tape feeder to the jig.
Section 4
2. Feeder
Measurement
If you detach the tape feeder with the master tapes being
attached from jig, you may cut your nger with sharp edges of
the master tapes or damage the tapes by bending the master
tapes, etc.
Be sure to detach the master tapes rst, then the tape feeder
from the jig.
Section 4
2. Feeder
Measurement
The master tapes are made of a thin metal. Carefully handle the
tapes to avoid cutting your nger with the tape edges.
Section 4
2.3.2 Detachment
of Master
Tape(s)
Carefully handle the dial gauge because the tip of the probe is
very sharp. Your hand will get injured if the tip is inserted.
Section 4
3.2 Measuring
Method
Safety Precautions
JO-116
Safe-121105-001
5. Precautionary Items for Correct Operations
5. Precautionary Items for Correct Operations
Requirements for Installation
Avoid any place that vibrates severely.
The ambient temperatures must be 20 ± 10
°
C and humidity 30 to 80 %.
Any dew condensation must be avoided.
When the machine is transferred to another place and the ambient temperature rises more
than the surface of the machine, dew may condense under the condition described below.
Note that dew condensation may cause the machine to break down.
Condition of Dew Condensation
Dew may condense when the difference (based on "Humidity (%)") between the ambient
temperature of the destination (the place where the machine was transferred) and the
surface temperature of the machine reaches the values or more in the table below.
Humidity (%) of Destination
Differences between Ambient Temperature of Destination
and Surface Temperature of Machine
80 3
°
C or more
70 6
°
C or more
60 8
°
C or more
50 10
°
C or more
40 14
°
C or more
30 18
°
C or more
Ensure that the selected place is free of electric noise, etc.
Precautionary measures (prevention of noise generation, etc.,) must be taken for other
equipment to prevent the machine from malfunctioning.
Do not expose the machine to combustible or corrosive gas.
Select a place free of lamp soot and dust.
Safety Precautions