00196504-02_UM_X-Serie_SR70X_EN.pdf - 第127页
User manual SIPLACE X-series Technical data for the machine From software version SR.70x.x x 01/2011 EN edition Placement head 127 3.5.2 SIPLACE MultiS t ar 3 Fig. 3.5 - 3 SIPLACE MultiSt ar - front view , function group…
Technical data for the machine User manual SIPLACE X-series
Placement head From software version SR.70x.xx 01/2011 EN edition
126
3.5.1.2 Technical data
3
3
3
3
3.5.1.3 Sensor for the component reject bin
PLEASE NOTE 3
If a SpeedStar is used, then we recommend that you install the optional sensor for the compo-
nent reject bin. (See also Section 6.4, page 403)
Range of components
a
a) Please note that the component range that can be placed is also affected by the pad geometry, the cus-
tomer-specific standards and the packaging tolerances.
01005 to 2220, Melf, SOT, SOD
Component specification
max. height
min. lead pitch
min. lead width
min. ball pitch
min. ball diameter
min. dimensions
max. dimensions
max. weight
4 mm
0.25 mm
0.1 mm
0.4 mm
0.2 mm
0.4 x 0.2 mm²
6 x 6 mm²
1 g
Programmable set-down force, variable increments 1.5 ± 0.5 N
2.0 ± 0.5 N
3.5 ± 1 N
4.5 ± 1 N
Nozzle types 10xx, 11xx, 12xx
X/Y accuracy
b
b) The accuracy value was measured using the vendor-neutral IPC standard.
± 41 μm/3, ± 55 μm/4
Angular accuracy ± 0.5°/3± 0.7°/4
CO camera type 23
Illumination levels 5
Possible illumination level settings 256
5
User manual SIPLACE X-series Technical data for the machine
From software version SR.70x.xx 01/2011 EN edition Placement head
127
3.5.2 SIPLACE MultiStar
3
Fig. 3.5 - 3 SIPLACE MultiStar - front view, function groups part 1
(1) Star with 12 segments
(2) Segment with integral DP drive
(3) Torque motor for the star drive
(4) Intermediate distributor board
(5) Control board for the 12 DP drives
(6) Compressed air connection for the Venturi nozzles in the pick-up/placement and holding cir-
cuit
Technical data for the machine User manual SIPLACE X-series
Placement head From software version SR.70x.xx 01/2011 EN edition
128
3
Fig. 3.5 - 4 SIPLACE MultiStar - front view, function groups part 2
(1) C&P component camera, type 30, 27 x 27, digital
(2) Torque motor for the star drive
(3) Z drive (linear motor)
(4) Return cylinder
(5) Pressure control valve