00196504-02_UM_X-Serie_SR70X_EN.pdf - 第403页
User manual SIPLACE X-series Station extensions From software version SR.70x.xx 01/2011 EN edi tion Sensor for the component reject bin 403 6.4 Sensor for the component reject bin Item no. 001 16848-xx Sensor , component…
Station extensions User manual SIPLACE X-series
Matrix tray changer From software version SR.70x.xx 01/2011 EN edition
402
6.3.7 X2 machine dimensions with MTC
6
6
6
6
Fig. 6.3 - 5 Dimensions of the X2 machine with matrix tray changer in millimeters
6
PLEASE NOTE 6
A matrix tray changer may be docked in at locations 2 and 4 in place of a component trolley.
User manual SIPLACE X-series Station extensions
From software version SR.70x.xx 01/2011 EN edition Sensor for the component reject bin
403
6.4 Sensor for the component reject bin
Item no. 00116848-xx Sensor, component reject bin, X-series/D3
The sensor for the component reject bin monitors whether the reject bin is seated correctly in its
mount.
– If the reject bin was not inserted correctly, the machine cannot be started.
– If the reject bin jumps out of its mount during the placement process, the machine is stopped
immediately to avoid a head crash.
Each reject bin can be monitored by a separate sensor.
PLEASE NOTE 6
If a SpeedStar is used, then we recommend that you install the optional sensor for the compo-
nent reject bin.
6.5 SIPLACE high-force head
Item no. 00119734-xx High-force head for the X-series
This item number only applies when a new placement machines is ordered with a high-force
head rather than a standard TwinStar. 6
Item no. 00119753-xx High-force head upgrade kit
Use this item number if you want to replace a standard TwinStar with a high-force head. 6
6.5.1 Description
The SIPLACE high-force head is a development offshoot of the standard TwinStar. It can process
the same component range and also offers the possibility of achieving set-down forces up to 30 N.
6.5.2 Technical data
6
Otherwise the technical data for the TwinStar and high-force head is the same (see Section
3.5.3.2
, page 138).
All the nozzles and grippers that are used with the standard TwinStar can be used for the
SIPLACE high-force head.
Programmable set-down force 2.0 N to 10 N ± 10 %
greater than 10 N up to 30 N ± 15 %
Station extensions User manual SIPLACE X-series
Component camera for the TwinStar, FC camera From software version SR.70x.xx 01/2011 EN edition
404
6.6 Component camera for the TwinStar, FC camera
6.6.1 Stationary P&P component camera (type 25) 16 x 16, digital (FC camera)
Item no. 00119718-xx Component camera, stationary, 16x16, digital, type 25
6
Fig. 6.6 - 1 Stationary P&P component camera (type 25) 16 x 16, digital (FC camera)
(1) Camera housing with integral camera and camera amplifier
(2) Glass plate - over the illumination and lens -levels