00196771-04_IM_SSW_705_04_SP2_DE_EN.pdf - 第17页
Station Software 705.04 SP2 / Installation Manual Ausgabe 06/2012 Edition --- CPPSZD 1) Z-bottom, CPP head --- WPCAXI 2) WPC5 feed axis and lift axis --- WPCHNG 2) WPC5 / WPC6 --- DLMHED 3) C&P12 head Table 4-2: Name…
Station Software 705.04 SP2 / Installation Manual Ausgabe 06/2012 Edition
4.1.3.2 Comparison of old and new names of the subsystems
Old subsystem name
(<70x)
New subsystem name
(70x)
Name
A AXIALL General axes (including free axis),
excluding DP axes of the C&P20A head
B COMTAB Component table
C VHSAXS Star axis of C&P20A head
E IOMODU CAN I/O module
F (Replaced by AXIALL) Free axis
G TAPCUT Tape cutter
H VHSHED C&P20A head
I TWIHED Twin Head
J VHSAXD DP axis of C&P20A head
L TWIAPR / VHSAPR Pressure regulation valve
(Twin Head / C&P20 head)
M MTCHNG MTC
N ---
O ---
P TWIAXZ Z-axis, Twin Head
Q ---
R TWIAXD DP axis, Twin Head
T CONVEY PCB conveyor
U FEEDER Feeder
V ILLUMI Vision
W VHSAXZ Z-axis, C&P20A head
X GANAXX X-axis
Y GANAXY Y-axis
--- CCPAPR
1)
Pressure regulation valve, CPP head
--- CPPAVA
1)
Valve cluster, CPP head
--- CPPAXD
1)
DP axis, CPP head
--- CPPHED
1)
CPP head
--- CPPSCO
1)
Component sensor
16
Station Software 705.04 SP2 / Installation Manual Ausgabe 06/2012 Edition
--- CPPSZD
1)
Z-bottom, CPP head
--- WPCAXI
2)
WPC5 feed axis and lift axis
--- WPCHNG
2)
WPC5 / WPC6
--- DLMHED
3)
C&P12 head
Table 4-2: Names of the subsystems
1)
as of 702.xx
2)
as of 703.xx
3)
as of 705.03
17
Station Software 705.04 SP2 / Installation Manual Ausgabe 06/2012 Edition
4.2 SIPLACE X-, SX- and DX-series hardware components
The following two diagrams show the hardware components of the computer system for the
SIPLACE X2, X3, X4 and X4I machines in two-computer operation:
Figure 4-1: Hardware components of the computer system for the SIPLACE X-series in two-computer operation (block
diagram)
18