00196578-03_AI_Pipettenwechsler_SX12_DE_EN.pdf - 第56页
2 Brief description 2.1 Product description 56 Assembly Instructions / Montageanleitung SIPLACE SX1/SX2 Nozzle Changer Pipettenwechsler 06/2020 2.1.1.1 SX1/SX2 V2 from machine no. Nxxxx The following modules are new from…
2 Brief description
2.1 Product description
Assembly Instructions / Montageanleitung SIPLACE SX1/SX2 Nozzle Changer Pipettenwechsler 06/2020 55
2 Brief description
In the following section you will find basic information about nozzle changers on the SIPLACE SX1/
SX2 V1, V2 and V3 machines.
2.1 Product description
The second nozzle changer row extends the machine by two nozzle changers. This extends it to
eight nozzle magazines, which significantly increases the flexibility.
General notes
●
The reject bin is used for components larger than 6 x 6 mm and for nozzles.
●
The reject bin for the second row is not used.
●
Only one nozzle changer is contained in the SIPLACE CPx nozzle changer packages.
●
If you want to full configure the row, you will always need another additional nozzle changer
SIPLACE CPx (row 1 / position 1 and 2).
●
When using a second row of nozzle changers, you need to fit the "extension row 2 NC
SX1/2" [03085718‑xx] from the relevant packages for positions 3 and 4.
This extension can be ordered separately.
●
Pay attention to the height setting!
2.1.1 SX1/SX2 V2/V3 overview
Fig.6: Overview (using example of SIPLACE SX V3)
1 Sector 1 (pneumatic unit) 2 Sector 2
3 Sector 3 (power supply) 4 Sector 4
5 Location 1 6 Location 2
2 Brief description
2.1 Product description
56 Assembly Instructions / Montageanleitung SIPLACE SX1/SX2 Nozzle Changer Pipettenwechsler 06/2020
2.1.1.1 SX1/SX2 V2 from machine no. Nxxxx
The following modules are new from machine number Nxxxx upwards:
●
Power supply unit (including 110V option)
●
Station computer
●
I/O module
●
MGCU
For details, read the relevant chapters in this manual.
2.1.1.2 Serial Number of Module
Fig.7: Serial number
The serial number of your placement
machine can be found on the typeplate (1).
2 Brief description
2.1 Product description
Assembly Instructions / Montageanleitung SIPLACE SX1/SX2 Nozzle Changer Pipettenwechsler 06/2020 57
2.1.2 Overview of nozzle changers
NOTICE
NC packages
A package must be ordered for each NC.
Overview NC SX1
Fig.8: NC - configuration SIPLACE SX1
Location 1/2, inner table position Location 1, outer table position
Location 2, inner table position
NC1-1 Location 1 NC position 1 NC1-1 Location 1 NC position 1
NC1-2 Location 1 NC position 2 NC1-2 Location 1 NC position 2
NC2-1 Location 2 NC position 1 NC1-3 Location 1 NC position 3
NC2-2 Location 2 NC position 2 NC1-4 Location 1 NC position 4
NC2-1 Location 2 NC position 1
NC2-2 Location 2 NC position 2
NOTICE
Nozzle changers row 1 and 2
The following applies for both locations:
► The NC at positions 1 and 2 together form NC row 1.
► The NC at positions 3 and 4 together form the optional NC row 2.