00193688-03.pdf - 第98页
4 Configuration Installation and Configuration Guide SIPLACE Explorer 4.1 Standard Monitoring Application (SMA) Edition 02/2005 EN 98 4.1.2.9 Step 8 - Generate Website → In order to monitor your production line in the we…
Installation and Configuration Guide SIPLACE Explorer 4 Configuration
Edition 02/2005 EN 4.1 Standard Monitoring Application (SMA)
97
– Step 3- Configure Database
→ Step 3 takes your modifications from Step 2 and uses them to configure the database
connection.
4
Fig. 4 - 36 Step 3- database connection wizard
→ Click on Finish and the wizard will carry out the required configuration. The DB settings are
now correctly specified for your project. and the database and set user will be created.
→ You will receive a success message.
4
Fig. 4 - 37 Step 3- database connection wizard
→ Click OK. You can then continue with Step 7 - Configure System Database.
→ When the system database has been configured, click on Next to continue with the next step.
4
4 Configuration Installation and Configuration Guide SIPLACE Explorer
4.1 Standard Monitoring Application (SMA) Edition 02/2005 EN
98
4.1.2.9 Step 8 - Generate Website
→ In order to monitor your production line in the web browser, you will need to generate a website.
For this purpose, you require web server manager privileges (Tomcat administrator) and the
corresponding password.
4
Fig. 4 - 38 Step 8: generate website
→ Specify the access data for the Tomcat administrator. If you entered admin and an empty
password during Tomcat configuration, this data will be automatically used as a default login.
If this is not the case, use the data you specified during Tomcat configuration.
Installation and Configuration Guide SIPLACE Explorer 4 Configuration
Edition 02/2005 EN 4.2 Configuring the Factory Configuration Utility
99
→ Enter the following information here:
– the website URL;
This URL contains a port number, which applies to the web server (Tomcat 5.0) e.g. "8080".
If you change the port number here, you will also need to update the port number of the web
serversiehe “Port Configuration after Changing Tomcat Port Number” auf Seite 60.
– the refresh rate;
For capacity purposes, we recommend a refresh rate of at least one minute (60000 ms).
– website language
– line host address;
– specify whether a login page is to be generated
→ Also you can uncheck the Enable site generation check box in order to skip website
generation and do it later while editing the generated application. After the website settings
have been defined or if you decide to skip this step, click Finish.
At this point, the application is generated automatically and is loaded into SIPLACE Explorer.4
4.2 Configuring the Factory Configuration Utility
4.2.1 Starting the SIPLACE Factory Configuration Utility
→ Start the SIPLACE Factory Configuration Utility via the Programs → SIPLACE Explorer
2.0 → Factory Configuration Utility menu in Windows.
4
Fig. 4 - 39 RTE Windows Start menu
→ Or click on the Factory Configuration Utility icon on your desktop.