HOST.pdf - 第24页

BM 122/ 123 /1 33/ 221/2 31 HOST COMPUTER SYSTEM 3. 3 C comm ands E35HEC- 4A-181- B0 3.3- 3  Setting the library dow nload Option Onl y 1 file per library can e x i st in the m achine. This option enabl es how to handl …

100%1 / 64
BM122/123/133/221/231
HOST COMPUTER SYSTEM
3.3 C commands
E35HEC-4A-181-B0
3.3-2
Ex.: C0P command and associated data
Command C0P123456789ABC
Data size
256 (No. of characters from %HEADER to ∗[CR][LF])
Data %HEADER[CR][LF]
NAME= P123456789ABC[CR][LF]
MACHINE=BM[CR][LF]
MNAME= BM[CR][LF]
CREATE=2003/01/01[CR][LF]
REVISE=2003/01/01[CR][LF]
TYPE=ABS[CR][LF]
BLOCK=00001[CR][LF]
MLSTEP=00000
PANASONIC=3010[CR][LF]
COMMENT=[CR][LF]
%BOARDDATA
&BOARD
BD(0,0,0)
DM(0,0,0)
&CONVEYOR
TP0CS1TSF1TSR1
%POFFSET[CR][LF]
X0Y0HM0F1[CR][LF]
%NCDATA[CR][LF]
N1X0Y0W0V0Z1PN( )C( )H0M000000T000000PW0BK0GR0DP0/0[CR][LF]
∗ [CR][LF]
Terminator 0
Terminator 0
Terminator 0
== For program data formats, refer to ‘Prg. / DATA FORMAT’.
BM122/123/133/221/231
HOST COMPUTER SYSTEM
3.3 C commands
E35HEC-4A-181-B0
3.3-3
Setting the library download Option
Only 1 file per library can exist in the machine. This option enables how to handle data if the same code
(data name) already exists in the machine.
Ex: Handling of shape codes when the same part library name exists both in source data and in target data.
Target data
Source data
Before download After download
Download Option
Library: L1
L1
Merge (Replace)
Overwrites the data in the machine with the
downloaded data.
Shape code
QFP06
QFP07
QFP08
QFP01
QFP02
QFP03
QFP06
QFP07
QFP08
Unregistered Only
Overwrites data in the machine if the name is
the same as the downloaded one.
All other data will be added.
QFP02
QFP03
QFP04
QFP01
QFP02
QFP03
QFP01
QFP02 :
Updated
QFP03 : Updated
QFP04 : Added
Whole Library
Does not overwrite the data in the machine
even if the name is the same.
QFP02
QFP03
QFP04
QFP01
QFP02
QFP03
QFP01
QFP02
QFP03
QFP04 :
Added
=REMARKS=
When there are same codes in the machine, there is no guarantee that those input last will always
appear at the top of the list or will be used when selecting program.
Always make sure that there are no duplicate shape codes before selecting programs.
BM122/123/133/221/231
HOST COMPUTER SYSTEM
3.3 C commands
E35HEC-4A-181-B0
3.3-4
Evaluation mode condition (0: H down 1: H away)
Max. data entries
Data Max. entries
Product program
Max 100 programs
Max 5000 steps / program
Product programs cannot be sent if they exceed these
conditions.
Part library Max 1000 parts
Mark library Max 500 marks
Supply library Max 500 types
Nozzle library Max 99 nozzles
=HINT=
When there are data already in the memory of machine, if the sum of existing data and data to be
downloaded exceeds the above-mentioned max. entries, an error (A4E00) will be returned when
downloading is attempted.
Downloading the machine data
Note that downloading the machine data will overwrite the existing machine data.
The C0G command enables only a part of operation condition data to be changed.
To load or save the whole machine data, do it on a floppy disk basis.
Ex.: C0G command and associated data
Command C0G
Data size 188
Data %HEADER[CR][LF]
NAME=G1[CR][LF]
MACHINE=BM[CR][LF]
MNAME= BM[CR][LF]
CREATE=2003/01/31[CR][LF]
REVISE=2003/01/31[CR][LF]
STEP=00000[CR][LF]
PANASONIC=3010[CR][LF]
COMMENT=[CR][LF]
%PARAMETER[CR][LF]
&CONDITIONDATA1[CR][LF]
1010001,1,1,0,0[CR][LF] =HINT=
∗[CR][LF]
Terminator 0
Terminator 0
Terminator 0
=HINT=
1 0 1 0 0 0 1 , 1 , 1 , 0 , 0
Offset manual mark position (0: Yes 1: No)
Evaluation mode (0: Yes 1: No)
Pass through (0: Yes 1: No)
Data No. (Fixed)