HOST.pdf - 第52页
BM 122/ 123 /1 33/ 221/2 31 HOST COMPUTER SYSTEM 4.1 Command T abl e E35HEC- 4A-161- A0 4.1- 1 4.1. Command Table E35HEC- 4A-161- A0 4.1. 1 Classi ficati on of Comm and Message s between the m ac hine and the host comput…
BM122/123/133/221/231
HOST COMPUTER SYSTEM
4. COMMAND TABLE
E35HEC-4A-CC1-A0
4-2
E35HEC-4A-CC1-A0
4. COMMAND TABLE
BM122/123/133/221/231
HOST COMPUTER SYSTEM
4.1 Command Table
E35HEC-4A-161-A0
4.1-1
4.1. Command Table
E35HEC-4A-161-A0
4.1.1 Classification of Command
Messages between the machine and the host computer are exchanged using the predetermined commands.
The commands are classified into the four large categories.
Com-
mand
Message Description Usage
A Acknowledge Used when the machine or the host
computer confirms the reception of
message.
Used in communications process, as
‘affirmative response’, ‘negative
response’, or ‘request to resend’ to the
message received.
C Control
Command
Used when the host computer
requests the machine for some
action.
Program transmission and reception
Machine start/stop/reset commands
D Data Means information being
transmitted between the machine
and the host computer.
Program transfer
R Real-time
Information
Used by the machine to inform the
host computer of condition changes
as they occur.
The machine sends information such as
operation status or errors in real time.
4.1.2 A Commands
STD: Commands available in standard specification
PP: Commands available in Panasonic Package (option)
Function
Com-
mand
Description
STD
PP
Request next data A0 Command used to confirm that the
transmitted data were received properly
and to request the next data.
Normal
Data transfer end A2 Command used to indicate that the
communication ended without error.
No requested data A3 Command used when the requested
program does not exist.
Operation error A4E00 This is returned if the machine or the host
computer is not in the condition for
receiving the command sent.
Error
Protocol error A4E01 This is returned if the next command is
sent during the processing of the last
command.
BM122/123/133/221/231
HOST COMPUTER SYSTEM
4.1 Command Table
E35HEC-4A-161-A0
4.1-2
4.1.3 C Commands
Commands related to data transfer
STD: Commands available in standard specification
PP: Commands available in Panasonic Package (option)
Function
Com-
mand
Description
STD
PP
Product program
C0Pxxx
Parts library
C0L
Mark library
C0B
Supply library
C0Y
Nozzle library
C0V
Download
Individual machine
data
C0G
Transfers each data from the host
computer to the machine.
Ex. C0Pxxxxx
↑
Enter a program name
Product program
C0RPxxx
Parts library
C0RL
Mark library
C0RB
Supply library
C0RY
Delete data
Nozzle library
C0RV
Deletes the specified data from the
machine.
Ex. C0RPxxxxx
↑
Enter the name of the program to be
deleted.
×
Product program
C1Pxxx
Transfers each data from the machine to
the host computer.
Parts library
C1L
Ex. C1Pxxxxx
Mark library
C1B
↑
Supply library
C1Y
Enter a program name
Nozzle library
C1V
Upload
Individual machine
data
C1G
Production
information
(Current total)
C1Mnnn
Pxxx
Uploads production information (Current
total) from the machine.
nnn: 000
Upload only
nnn: 900
After uploading, clears all the machine
information, nozzle information and
feeder information of current total.
Production
information
(Grand total)
C1Mnnn
Nozzle information
(Grand total)
C1Nnnn
Uploading
production
management
information
Feeder information
(Grand total)
C1Znnn
Uploads production information (Grand
total) from the machine.
nnn: 000
Upload only
nnn: 900
After uploading, clears all the machine
information.
Program list Product program
C1RP
Uploads program lists of product programs
stored in the machine.
Machine status
C2ST
Uploads machine status.
×
Wire-break
check
C2HB
Sends the result of wire-break check to the
machine.
Inquiring the
selected
program name
Product program
C3P
Uploads the selected product program
name.