HOST.pdf - 第45页
BM 122/ 123 /1 33/ 221/2 31 HOST COMPUTER SYSTEM 3.4 R Comm ands E35HEC- 4A-191- A0 3.4- 8
BM122/123/133/221/231
HOST COMPUTER SYSTEM
3.4 R Commands
E35HEC-4A-191-A0
3.4-7
3.4.5 Recovery Information: R3
R3 commands are used to notify the host computer of the result of recovery operation.
Command format: R3∗∗∗∗
∗∗∗∗ code application
∗∗∗∗
Description
GDCT Notifies that the executed recovery cycle was successful.
NGCT
Notifies that the executed recovery cycle also failed and another recovery will be
performed.
NGEP
Notifies that the executed recovery cycle also failed and the machine will be stopped
due to an error.
=HINT=
If component exhaustion is determined after recovery, no R3 command (result of recovery) will be sent but
only R2E03 (component exhaustion) will be sent.
For this reason the number of R1RC (recovery start) commands does not always agree with that of R3
commands.
3.4.6 Setting the Output Condition of R Command
When R command (option) is enabled, the condition for outputting the command can be set as follows.
Setting by communication mode
Remote mode On-line mode
ON
OFF
×
{: R command will be output.
Setting by communication mode
Command format
ON
R0CTnnnn / R0EPnnnn
R1SEPxx…xx / R1SENGPxx…xxE∗∗∗xxxxxx
R2ExxSxxxNxxxZxxxM0T000xxxxxx
OFF
R0CT / R0EP
R1SE / R1SENG
R2ExxSxxxNxxxZxxxM0T000
BM122/123/133/221/231
HOST COMPUTER SYSTEM
3.4 R Commands
E35HEC-4A-191-A0
3.4-8
BM122/123/133/221/231
HOST COMPUTER SYSTEM
3.5 Wire-break Detection C2HB / R1HB
E35HEC-4A-121-A0
3.5-1
3.5. Wire-break Detection C2HB / R1HB
E35HEC-4A-121-A0
3.5.1 Purpose
These commands are for detecting communications trouble between the machine equipped with
PanaProtocol LAN and the host computer quickly.
C2HB command
Item Description
Command name Wire-break detection (Inquiry)
COM port used Port 1
Data format
Item Description
Command field C2HBxxxxxxxx
Data size field 0
Data field None
Command format:
(1) Command field
(2) Sends 00 (0)
C2HB xx xxxxxx
(1) (2) (3)
(3) ID field: 6 characters
R1HB command
Item Description
Command name Wire-break detection (Response)
COM port used Port 2
Data format
Item Description
Command field R1HBxxxxxxxx
Data size field 0
Data field None
Command format:
(4) Command field
(5) Sends 00 (0)
R1HB xx xxxxxx
(4) (5) (6)
(6) ID field: 6 characters
Responds with the copied character string of (3) received as a part of
C2HB command.
Command sequence
Host computer system Equipment
C2HBxxxxxxxx (1)
(1) A2 (Data transfer end)
(1) R1HB
(1) No data type (2) Data-attached type