HOST.pdf - 第56页
BM 122/ 123 /1 33/ 221/2 31 HOST COMPUTER SYSTEM 4.1 Command T abl e E35HEC- 4A-161- A0 4.1- 5 STD: Comm ands a v a il able in standar d speci fi cati on PP: Commands avail abl e i n Panasonic Pack age (opti on) Func tio…
BM122/123/133/221/231
HOST COMPUTER SYSTEM
4.1 Command Table
E35HEC-4A-161-A0
4.1-4
4.1.5 R Commands
STD: Commands available in standard specification
PP: Commands available in Panasonic Package (option)
Function
Com-
mand
Description
STD
PP
EOP pass
R0CT
Generated when production has been
completed up to the final block of the
program. However, production continues.
×
EOP stop
R0EP
Generated the machine has stopped after
completing the production up to the final
block of the program.
×
Production
possible
R0BDG
Generated when a board has been judged
to be OK by bad mark detection.
×
Production
information
Production
impossible
R0BDNG
Generated when a board has been judged
to be NG by bad mark detection.
×
Remote mode
R1OL
Generated when the communications
mode has been switched to REMOTE.
×
On-line mode
R1FL
Generated when the communications
mode has been switched to ON-LINE.
×
Emergency stop
R1ES
Generated when power has been turned
OFF.
×
Start
R1ST
Generated when production has been
started.
×
1BLOCK stop
R1SP
Generated when the machine has come to
a 1 block stop.
×
Reset
R1RE
Generated when a resetting has been
made.
×
PCB loading wait
R1PW
Generated when no PC board has been
loaded/unladed even after a given length
of time.
×
PCB loading wait
cancel
R1PE
Generated when the above wait condition
has been cleared.
×
PCB stock
R1PS
Generated when a PC board has been
stocked in the loader.
×
Loading complete
R1LD
Generated when loading of a PC board to
the table has been completed.
×
Last PCB
unloading
complete
R1UP
Generated when all PC boards in the
machine has been finished and unloaded
to the downstream process in the L.STOP
mode (by a C5UP command).
×
Last PCB
production
complete
R1OG
Generated when the production with the
final PC board in the L.STOP mode (by a
C5UP command) has been completed.
×
Recovery start
R1RC
Generated when the machine has started
recovery for a pickup error, a recognition
error or a parts exhaust error.
×
Width adjustment
complete
R1TE
Generated when width adjustment has
been completed.
×
Run
R1RU
Machine status notification: Generated
when the machine status has changed
from Error or Ready to Run
×
Ready
R1RD
Machine status notification: Generated
when the machine status has changed
from Run or Error to Ready.
×
Error stop
R1ER
Machine status notification: Generated
when the machine status has changed
from Run to Error.
×
Operation
information
Wire-break check
R1HB
Generated as a response to the wire-break
check by a C2HB command.
×
BM122/123/133/221/231
HOST COMPUTER SYSTEM
4.1 Command Table
E35HEC-4A-161-A0
4.1-5
STD: Commands available in standard specification
PP: Commands available in Panasonic Package (option)
Function
Com-
mand
Description
STD
PP
Normal end
R1SE
Generated when program selection has
been completed successfully.
×
Program
selection result
Abnormal end
R1SENG
Generated when program selection has
ended abnormally.
×
Pickup information
R2E02
Information of a pickup error
×
Parts exhaust
information
R2E03
Information of a parts exhaust error
×
Transfer
information
R2E05
Information of a board transfer error
×
Overrun
information
R2E07
Information of an overrun
×
Other information
R2E08
Information of other error
×
Interlock
information
R2E10
Information of an interlock error
×
Warning
information
R2E16
Information of a warning error
×
Recognition
information
R2E18
Information of a recognition error
×
Error
information
Width adjustment
information
R2TE
Information of a width adjustment error
×
OK
R3GDCT
Generated when recovery has been
completed successfully.
×
NG (Continue)
R3NGCT
Generated when recovery has failed
(recovery will continue).
×
Recovery
information
NG (Stop)
R3NGEP
Generated when recovery has failed (the
machine will stop).
×
BM122/123/133/221/231
HOST COMPUTER SYSTEM
4.1 Command Table
E35HEC-4A-161-A0
4.1-6