00196932-02 SM S-Feeder Repair DE+EN multilang.pdf - 第121页
9 3x8mm S-Feeder Transport motor exchan ge 9.2 Drive motor assembly SIPLACE S-Feeder Repair SIPLACE S-Förderer Reparatur 121 9.2 9 . 2 D r iv e m o t o r a s s e m b ly Drive motor assembly Required tools for assembly ▪ …
9 3x8mm S-Feeder Transport motor exchange
9.1 Drive motor disassembly
120 SIPLACE S-Feeder Repair SIPLACE S-Förderer Reparatur
▪ Loosen the motor fastening (right feeder - side)
-> 2 screws
▪ Please do not lose the limit pin!
▪ The disassembly is completed
9 3x8mm S-Feeder Transport motor exchange
9.2 Drive motor assembly
SIPLACE S-Feeder Repair SIPLACE S-Förderer Reparatur 121
9.2
9.2 Drive motor assembly
Drive motor assembly
Required tools for assembly
▪ Allen key 2.5
▪ Waterproofed coloured pencil (green/blue/red)
▪ Distance plate 0,7mm
▪ Distance plate 0,63 mm
▪ Safety plate right/middle
▪ Safety plate left
▪ Crosshead screwdriver (small)
▪ Label the connectors:
1 = Red (left track)
2 = Green (middle track)
3 = Blue (right track)
▪ Bend the cables according to the motor position.
▪ Use the demounted motor as sample.
▪ For the left and middle track a motor labled „Left“ will
be used!
The following drill holes are used for fixation of motors:
1. Screws for drive motor middle.
2. Screws for drive motor left.
3. Screws for drive motor right.
9 3x8mm S-Feeder Transport motor exchange
9.2 Drive motor assembly
122 SIPLACE S-Feeder Repair SIPLACE S-Förderer Reparatur
1. Place the new motor
2. Fix the moter loosely with the two mounting screws.
1. Route the cable
2. Connect the motor to the corresponding socket on
the control!
1. Insert the appropriate safety plate. This protects
against mechanical damages to the motor!
2. Slide the toothed rack under the motor gear pinion.
Turn the motor shaft. Observe the limit pin.