00196932-02 SM S-Feeder Repair DE+EN multilang.pdf - 第91页
4 S-Feeder Test Software 4.1 Checking of 2x8mm S-Feeder SIPLACE S-Feeder Repair SIPLACE S-Förderer Reparatur 91 F8 Worm gear clearance 1. Start the test " worm clearance" with the F8 key. The pin wheel in the l…
4 S-Feeder Test Software
4.1 Checking of 2x8mm S-Feeder
90 SIPLACE S-Feeder Repair SIPLACE S-Förderer Reparatur
F7. Hand (Component cover)
1. Start the test with "component cover" with the key F7.
The "component cover" (BE-cover) opens and closes 10
times. You can delay the process or stop by pressing the
green and then yellow button. .
2. Please Note during the test the software only checks
the communication with the selected Track.
3. The result is shown at the comment field.
4 S-Feeder Test Software
4.1 Checking of 2x8mm S-Feeder
SIPLACE S-Feeder Repair SIPLACE S-Förderer Reparatur 91
F8 Worm gear clearance
1. Start the test "worm clearance" with the F8 key. The pin
wheel in the left track starts
2. Press the green key to start the measuring process.
3. In the comment field times appear. If an error occurs,
the worm clearance set.
4. Switch of the track with F4 and repeat steps 1 to 3 for
the right track.
5. With the F2 key you can overclock the pin wheel a
quarter turn.
6. Close the menu worm clearance
4 S-Feeder Test Software
4.1 Checking of 2x8mm S-Feeder
92 SIPLACE S-Feeder Repair SIPLACE S-Förderer Reparatur
F9 Conveyor
1. Start the Test "transport" with the F9 key.
The Transport wheel is indexed 90 times..
2. Wait for the application flow of the test function for the
left track.
3. The result is shown at the comment field.
Turn F4 to the right lane and repeat steps 1 through 3