00196932-02 SM S-Feeder Repair DE+EN multilang.pdf - 第138页
11 3x8mm S-Feeder - Worm gear drive 11.1 Removal of worm gear drive 138 SIPLACE S-Feeder Repair SIPLACE S-Förderer Reparatur Removal of Tape Channel top [00344007-xx] ▪ Remo ve 4 screw s from sequ ence 1 to 4 1. Remove b…
11 3x8mm S-Feeder - Worm gear drive
11.1 Removal of worm gear drive
SIPLACE S-Feeder Repair SIPLACE S-Förderer Reparatur 137
1. Remove the M1.3 screw on the tape channel
[03048474-xx] as shown.
1. Disconnect all drive motor and lifting magnet connec
-
tors (qty : 4) from the distributor board
[00345354Sxx].
1. Remove four M2.5 screws at the lower side as
shown.
11 3x8mm S-Feeder - Worm gear drive
11.1 Removal of worm gear drive
138 SIPLACE S-Feeder Repair SIPLACE S-Förderer Reparatur
Removal of Tape Channel top [00344007-xx]
▪ Remove 4 screws from sequence 1 to 4
1. Remove both screws from front protective plate
[00345830-xx].
1. Remove 4 screws from the bearing support wall
[00344019-xx].
2. Next, remove retaining screw for tape channel top
complete.
3. Lift the tape channel top upwards.
11 3x8mm S-Feeder - Worm gear drive
11.1 Removal of worm gear drive
SIPLACE S-Feeder Repair SIPLACE S-Förderer Reparatur 139
Removal of the Worm Gear
1. Remove M1.5 screw from each of the worm wheel
sealings.
NOTICE! All 3 worm wheel sealings have differ
-
ent marking on the body.
Li = Left [00348971-xx]
m = Middle [00348972-xx]
re = Right [00348973-xx]
1. Remove the transport storage unit [00344048-xx]
Remove the drive motors:
1. Right drive motor complete [00351603-xx]
2. Left/right drive motor complete [00351602-xx]