NR_Mechanischer_Stopper.pdf - 第128页

Assembly Instructions PCB Stopper Sin gle Conveyor SIPLACE S-27HM / HS-60 / D4 / D3 / HF- / X-Series Edition 06/2007 128

Assembly Instructions PCB Stopper Single Conveyor SIPLACE S-27HM / HS-60 / D4 / D3 / HF- / X-Series

Edition 06/2007

127

11.2.5 Use as prescribed

The product must only be used for its intended purposes as described in the catalogs and

technical descriptions, namely the placement of SMD components, and only with the third-party

equipment and components recommended or permitted by Siemens A&D. Use for a different or

extended purpose is not prescribed.

If the product is not used as prescribed, Siemens accepts no liability for any damage that may

occur and does not guarantee that the components will work properly and without problems.

Use as prescribed also includes compliance with all the instructions in the user manual.

For the product to operate correctly and reliably, it must have been transported, stored, erected

and assembled correctly and must be operated and maintained with care.

11.2.6 Failure to use as prescribed

Failure to use the product as prescribed can result in both danger to life and limb and material

damage. For this reason any use that is not prescribed is not allowed. If the product is not used

as prescribed, Siemens accepts no liability for any damage that may occur and does not

guarantee that the components will work properly and without problems.

Failure to use the option as prescribed includes, for example:

– operation with other machines than the approved machine types by Siemens AG.

– operation of this option within an environment differing from that one specified in this manual.

– use of the placement machine with the installed option by unqualified personnel.

Assembly Instructions PCB Stopper Single Conveyor SIPLACE S-27HM / HS-60 / D4 / D3 / HF- / X-Series

Edition 06/2007

128

Assembly Instructions PCB Stopper Single Conveyor SIPLACE S-27HM / HS-60 / D4 / D3 / HF- / X-Series

Edition 06/2007

129

12 Assembly Instructions PCB Stopper

SIPLACE S-27HM / HS-60 / D4 / D3 /

HF- / X-Series

ATTENTION: This internal document describes service work to SIPLACE placement machines,

which may only be performed by specially trained Siemens service technicians. 12

The description of the installation process is based on the example of a dual conveyor.Single con-

veyor installation is carried out similarly. Attention is drawn to significant differences.

12.1 Functional description

Fig. 106

The optional mechanical stopper was developed for placement machines of the X-Series, HF-Se-

ries, HS-60, D3, D4 and S-27 HM. These are fitted as standard with modular PCB conveyors and

laser light barriers for stopping the printed circuit boards.

Placement machines of the types HS-50, F5 HM and S-25 HM on the other hand have a PCB con-

veyor with mechanical stopper. 12

Stopper, basic unit

Rotating cylinder

Sonar sensor

Stopper

Stopper sensor top/bottom