NR_Mechanischer_Stopper.pdf - 第179页

Assembly Instructions PCB Stopper Single Conveyor SIPLACE S-27HM / HS-60 / D4 / D 3 / HF- / X-Series Edition 06/2007 179 14 Retrofitting SIPLACE S-27HM 14.1 Prep aratory work Caution: Before the stopper is mou nted in th…

100%1 / 238
Assembly Instructions PCB Stopper Single Conveyor SIPLACE S-27HM / HS-60 / D4 / D3 / HF- / X-Series
Edition 06/2007
178
13.6 Pneumatics plan HS-60, D4
Fig. 153 Pneumatics plan HS-60, D4
Assembly Instructions PCB Stopper Single Conveyor SIPLACE S-27HM / HS-60 / D4 / D3 / HF- / X-Series
Edition 06/2007
179
14 Retrofitting SIPLACE S-27HM
14.1 Preparatory work
Caution: Before the stopper is mounted in the machine, it should be adjusted with the guide strip
and the shims. Care should be taken to ensure that the stopper is not too loose or too tight. The
graduation of the shims is 0.1mm.
(See also Fig. 209, page - 232.) 14
14
O Changeover to the SITEST.
O Select "Conveyor" and "Conveyor width".
O Adjust the conveyor width to maximum.
O Undock the component trolley on both sides.
O Shut down the operating system and switch off the placement machine at the main switch.
Assembly Instructions PCB Stopper Single Conveyor SIPLACE S-27HM / HS-60 / D4 / D3 / HF- / X-Series
Edition 06/2007
180
14.1.1 Complete overview
Fig. 154 Overview S-27HM (Fig. 1) Single conveyor