00198001-02_IM_709.1_DE_EN.pdf - 第14页
Station Software 709.1 / Installation Manual Ausgabe 05/2016 E dition 14 4 Requirements 4.1 Software Co mponents of SIPLACE Series X, X S, SX , DX , CA and TX 4.1.1 Station The station only uses one of the foll owing ope…
Station Software 709.1 / Installation Manual Ausgabe 05/2016 Edition
13
3.9 Upgrading from 60x Software Versions (X-Series Placement
Machines)
► Please contact the SIPLACE Service before upgrading from the 60x software version to 709.x.
The staff will advise you on the required modules and necessary steps.
Station Software 709.1 / Installation Manual Ausgabe 05/2016 Edition
14
4 Requirements
4.1 Software Components of SIPLACE Series X, X S, SX, DX, CA and
TX
4.1.1 Station
The station only uses one of the following operating system configurations on the station computer
and Coplan computer/feeder computer:
– Microsoft Windows Embedded Standard 7 (WES7, 32-bit or 64-bit)
The station computer has to be equipped with at least 2 GB memory with WES 7, 32-bit and 4 GB
memory with WES7, 64-bit respectively. If necessary, station computers in the field have to be
exchanged or upgraded with a memory extension. Please refer to the Technical Information
TI2014-09E04.
4.1.2 Machine Components
The following versions of other machine components are required for the station software to
function correctly:
SIPLACE station software SIPLACE Vision SIPLACE Pro
Version 709.1 Version 532 Version 13.1
*)
*)
in compatible mode: SIPLACE Pro 12.x
CAUTION
The functional statuses of the station computer, Vision computer and SIPLACE Pro
software must be compatible, as specified above. Another configuration is not supported.
Station Software 709.1 / Installation Manual Ausgabe 05/2016 Edition
15
4.1.3 Embedded Software
4.1.3.1 Composition of the File Name
1..6 7 8 9 10 11 12 13 14 15 16 17 18 19
Sub-
system
name
Sepa-
rator
Variant ID Hard-
ware ID
1)
Target
2)
Version Release . File type
See table
in section
4.1.3.2
_ 0 = no
variant
00
0 = BIOS 00
H
00
H
. HEX
_ A =
Variant
(SOKO)
…
1 = App 1 … … . JED
_ ... 99 2 = App 2 FF
H
FF
H
. BHX
Table 4-1: Composition of the file name
1)
Change compared with old file name (from one to 2 digits)
2)
Extended to second CAN