00197551-01_MM_CPP-CP-Twin_Kunde_en.pdf - 第13页

Overview of the Modules CPP Maintenance Manual SIPLACE Placement Heads CPP, C &P20, Twin 13 2 2 O v e r v ie w o f t h e M o d u le s Overview of the Modules 2.1 2 . 1 C P P CPP CPP CPP with camera SST29 [03070108 - …

Introduction

Staff Qualifications and Training 1.3.6 SIPLACE on the World Wide Web (WWW)

12 Maintenance Manual SIPLACE Placement Heads CPP, C&P20, Twin

1.3.6

1.3.6 SIPLACE on the World Wide Web (WWW)

SIPLACE on the World Wide Web (WWW)

Log into our SIPLACE

homepage at http://www.siplace.com.

► You can choose between the German and English versions.

The different sections contain information about our products, services and contact persons.

In addition, registered customers can also access the

SIPLACE User Group

. Here you can call up spe-

cial information about our placement systems e.g.

▪ Technical documentation,

▪ Technical information,

▪ Spare parts lists etc.

Registration for the user group is very simple:

► Click on the Register link.

► Fill in the registration form and send it off to us.

Soon afterwards, you will receive your access authorization with USER ID and password.

1.4

1.4 Staff Qualifications and Training

Staff Qualifications and Training

Qualified or adequately trained personnel means that these people are familiar with the setting up, op-

eration and maintenance of automatic placement systems and add-on devices and are suitably qualified,

e.g.:

▪ Have been trained, instructed or authorized to switch on and off, isolate, earth and identify electrical

circuits and system components in accordance with normal safety standards.

▪ Have been trained or instructed in the upkeep and use of appropriate safety equipment in accord-

ance with normal safety standards.

▪ Have received first aid training.

Overview of the Modules

CPP

Maintenance Manual SIPLACE Placement Heads CPP, C&P20, Twin 13

2 Overview of the Modules

Overview of the Modules

2.1

2.1 CPP

CPP

CPP with camera SST29 [03070108-xx]

CPP without camera [03053528-xx]

1. Intermediate distributor 1 and 2 (ID1, ID2)

2. Star motor (integrated in head housing)

3. DP axis (as direct drive)

4. Pressure control valve

5. Component camera (behind the intermediate distrib-

utor, standard: SST29)

6. Single core solution (SCS) – DP drive control

7. Holding circuit supply, integrated venturi nozzles and

valve assembly (valve terminal)

8. Z axis with return cylinder

9. Component sensor in the pick and place position (on

the underside)

Overview of the Modules

C&P Variants 2.2.1 C&P20, C&P20 A and C&P20 M

14 Maintenance Manual SIPLACE Placement Heads CPP, C&P20, Twin

2.2

2.2 C&P Variants

C&P Variants

2.2.1

2.2.1 C&P20, C&P20 A and C&P20 M

C&P20, C&P20 A and C&P20 M

2.2.2

2.2.2 C&P20 P

C&P20 P

C&P20 A

1. Star motor

2. Pressure control valve

3. DP drives (20 x)

4. Star with 20 nozzles

5. Component Camera

6. Intermediate distributor board

C&P20 P

1. Star motor

2. Return unit

3. Pressure control valve

4. Star with 20 nozzles

5. DP drives (20 x)

6. Intermediate distributor board