00197551-01_MM_CPP-CP-Twin_Kunde_en.pdf - 第41页
Maintenance Tasks for C&P20/A/M/P Head Preparatory Steps Maintenance Manual SIPLACE Placement Heads CPP, C &P20, Twin 41 4.4 4 . 4 P r e p a r a t o r y S t e p s Preparatory Steps Preparing the Head Mount Prepar…
Maintenance Tasks for C&P20/A/M/P Head
Tools, Consumables, Spare and Wear Parts
40 Maintenance Manual SIPLACE Placement Heads CPP, C&P20, Twin
See also
8.2 Tools, Consumables, Spare and Wear Parts [ ➙ 81]
Allan key set 0.7 – 2 mm 00320265- xx X
Set of Allen keys 00376492- xx
Angled tweezers 00096487- xx
Lubrication brush set 10 pieces 00370771- xx
Diagonal cutter electronics, size 110 00318673- xx X*
Torque interchangeable blades 3mm hexagonal 03109522- xx X
Fork wrench, size 10 03109302- xx X
Torque screwdriver ESD 0.1-0.6 Nm 00386132- xx X
Torque interchangeable blades 1.5 mm, hexagonal 00386135- xx X
Torque interchangeable blades 2 mm, hexagonal 00386136- xx X
Torx blade TX6 150 03076647- xx X*
Press-fit blade for Phillips screwdriver size 1
Slotted screwdriver size 0
C&P20 only:
Combitips Plus 0.1 ml white 00386155- xx
C&P20/A/M only:
Filter disk extraction device C&P20/A/M (transparent) 03055046- xx X*
C&P20 P only:
Filter disk extraction device C&P20 P (green) 03108641- xx
Additionally required documentation Item no. HMK
If required, service manual for removal and installation of placement head
in your machine.
► Note: You need more tools etc.
If required, service manual SIPLACE C&P20, C&P20 A, C&P20 M 00197464- xx
If required, service manual SIPLACE C&P20 P 00197489- xx
User manual "Insertion/extraction tool for filter disks, C&P20A" 00195378- xx
If required, assembly instructions "Universal placement head mounting
rack"
00196371- xx
Spare parts Item no. HMK
For compressed air operation:
Holding circuit assembly (incl. silencer) C&P20/A/M/P 03005123- xx
Silencer assembly C&P20/A/M/P 03043707- xx
For vacuum pump operation:
Reflecting ring assembly (incl. cover) C&P20/A/M 3046348-xx
Reflecting ring assembly (incl. cover) C&P20 P 03108716-xx
Tools Item no. HMK
Maintenance Tasks for C&P20/A/M/P Head
Preparatory Steps
Maintenance Manual SIPLACE Placement Heads CPP, C&P20, Twin 41
4.4
4.4 Preparatory Steps
Preparatory Steps
Preparing the Head Mount
Preparing the Head Mount
► Assemble the head mount. For details, refer to the assembly instructions "Universal placement head
mounting rack" [DE+EN: 00196371-xx].
Vacuum test
► Set the nozzles for the current nozzle configuration down in the nozzle changer.
► Before you begin maintenance work, perform a vacuum test. Use the calibration nozzles for this
(C&P20/A/M: 1235, C&P20 P: 4235).
If vacuum value irregularities occur at certain segments, take a closer look at these during mainte-
nance work. Note down the numbers of the problematic segments for later reference.
Preparing the Placement Head
► Dismantle the placement head and remove it from the placement machine. For details, refer to the
service manual for your machine.
Use the FHE function if possible.
► Fit the placement head onto the head mount.
Multipette
CAUTION
ESD
► Connect the assembly mount ESD connection to an ESD connection at the workplace.
► Always observe the ESD regulations described in the user manual.
Protective hose for component sensor (example of
C&P20 A shown)
► Fit the protective hose (1) onto the component sen-
sor.
NOTICE!
A cover is used on the C&P20 P, instead of the protective
hose.
Maintenance Tasks for C&P20/A/M/P Head
Preparatory Steps
42 Maintenance Manual SIPLACE Placement Heads CPP, C&P20, Twin
Multipette
► Prepare the multipette. For more information about this, read section "9 Handling the Multipette"
[ ➙ 89]. Also observe the following instructions:
Color-coding of dosage devices and lubricants
CAUTION
Do not combine lubricants!
Contamination (combination) of lubricants can affect the service life of the bearings!
► Only use the combitip specifically marked for each lubricant, to avoid combining the lubri-
cants.
Color Tools and lubricants Application
White White combitip
Nye Synthetic Oil 200A 30 ml
Driver bearing
(C&P20 only)
Black Black combitip
Klüberalfa DH 3-100
Driver bearing
(C&P20A/M/P only, not C&P20)
Blue Blue combitip
Lubcon Thermoplex ALN 1001/00 50 ml
Segment guide rail/Z axis guide
(all C&P20 variants)