00197551-01_MM_CPP-CP-Twin_Kunde_en.pdf - 第2页
All names identified by ® are registered trademarks of ASM Asse mbly Systems GmbH & Co. KG. The remaining trademarks in this pu blication may be trademarks whose use by third par ties for their own purposes could vio…
Title page
SIPLACE CPP / C&P20 / Twin
Maintenance Manual
Edition 06/2014 EN
All names identified by ® are registered trademarks of ASM Assembly Systems GmbH & Co. KG. The remaining trademarks in this publication
may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.
We have reviewed t he contents of this publication to ensure consistency with the hardware and software described. Since variance cannot be
precluded entirely, we cannot guarantee full consistency. However, the information in this publication is reviewed regularly and any necessary
connections are included in subsequent editions.
Copyright © ASM Assembly Systems Technical data subject to change
ASM Assembly Systems GmbH & Co. KG
Rupert-Mayer-Strasse 44
81379 München
Germany
Item no.: 00197551-01
www.siplace.com Printed by ASM Assembly Systems
Table of contents
Maintenance Manual SIPLACE Placement Heads CPP, C&P20, Twin 3
Table of Contents
1 Introduction 7
1.1 Safety Instructions 7
1.1.1 Conventions for the use of safety instructions 7
1.1.2 Safety Instructions for Maintenance Tasks 8
1.1.3 Safety Instructions on Hazardous Materials 8
1.2 Maintenance Notes 9
1.2.1 Calculation of Maintenance Intervals 9
1.2.1.1 Adjusting the Maintenance Intervals to Actual Production Conditions 9
1.3 Other Instructions 10
1.3.1 Environmentally-Friendly Disposal of Materials and Components 10
1.3.2 Use of Original SIPLACE Accessories and Spare Parts 10
1.3.3 ESD Guidelines 10
1.3.3.1 Definition of ESD 10
1.3.3.2 Important Measures to Protect Against Static Charging 10
1.3.3.3 Handling ESD Modules 10
1.3.3.4 Measurements and Modifications to ESD Modules 11
1.3.3.5 Dispatching ESD Modules 11
1.3.4 Validity of Document 11
1.3.5 Release History 11
1.3.6 SIPLACE on the World Wide Web (WWW) 12
1.4 Staff Qualifications and Training 12
2 Overview of the Modules 13
2.1 CPP 13
2.2 C&P Variants 14
2.2.1 C&P20, C&P20 A and C&P20 M 14
2.2.2 C&P20 P 14
2.3 Twin Variants 15
2.3.1 Twin and Twin HF 15
2.3.2 Twin VHF 15
2.4 Head Maintenance Kit (HMK) 16
3 Maintenance tasks for CPP 17
3.1 Maintenance Intervals 17
3.2 Tools, Consumables, Spare and Wear Parts 18
3.3 Preparatory Steps 20
3.4 Overview of Lubrication Points 22
3.5 Performing Maintenance Tasks 24
3.5.1 Replacing the Pressure Control Valve 24
3.5.2 Maintenance Tasks on Vacuum-Conducting Parts 24
3.5.3 Oiling the Z-Axis Support Roller (Version 05 Only) 27
3.5.4 Oiling the Z Axis Linear Guidance 27
3.5.5 Checking/Replacing the DP Vacuum Hoses 28
3.5.6 Cleaning the Light Barrier on the DP Drive 28
3.5.7 Oiling the DP Segment Guide 30
3.5.8 Oiling the DP Driver Bearing 30
3.5.9 Replacing the Filter Disks 31
3.5.10 Oiling the Star Bearing 32
3.5.11 Cleaning the Component Sensor 33
3.6 Final Work 34
4 Maintenance Tasks for C&P20/A/M/P Head 35