00197551-01_MM_CPP-CP-Twin_Kunde_en.pdf - 第65页
Maintenance Tasks for Pressure Control Valve Tools, Consumables, Spare and Wear Parts Maintenance Manual SIPLACE Placement Heads CPP, C &P20, Twin 65 6 6 M a in t e n a n c e T a s k s f o r P r e s s u r e C o n t r…
Maintenance Tasks for Twin
Performing Maintenance Tasks 5.4.2 Cleaning the Sleeve and Nozzle Seat
64 Maintenance Manual SIPLACE Placement Heads CPP, C&P20, Twin
5.4.2
5.4.2 Cleaning the Sleeve and Nozzle Seat
Cleaning the Sleeve and Nozzle Seat
5.4.3
5.4.3 Cleaning/Replacing the Additional Volume Filter
Cleaning/Replacing the Additional Volume Filter
Sleeve (Twin shown as example)
► Spray a small amount of Teflon oil on a lint-free cloth
and clean the sleeve and nozzle seat.
Alternatively you can also use a SIPLACE cleaning
cloth.
► Carefully blow through the nozzle.
► Repeat these steps on the second Twin module if
necessary.
Filter (example of Twin shown)
► Unscrew the lid (1) of the filter.
NOTICE!
If the filter is difficult to access, use the long-nosed pliers
to help you.
► Remove the filter (2).
► Clean the filter by blowing compressed air through it.
► Check the filter for damage.
► If it is damaged replace it with a new one.
► Screw the filter tight again.
► Repeat these steps on the second Twin module if
necessary.
Maintenance Tasks for Pressure Control Valve
Tools, Consumables, Spare and Wear Parts
Maintenance Manual SIPLACE Placement Heads CPP, C&P20, Twin 65
6
6 Maintenance Tasks for Pressure Control Valve
Maintenance Tasks for Pressure Control Valve
6.1
6.1 Tools, Consumables, Spare and Wear Parts
Tools, Consumables, Spare and Wear Parts
The following lists contain all necessary consumable materials, wear and spare parts plus tools for per-
forming maintenance tasks to the pressure control valve.
HMK = Included in Head Maintenance Kit
See also
8.2 Tools, Consumables, Spare and Wear Parts [ ➙ 81]
Consumables Item no. HMK
Lint-free cloth, KM wipe 03082092- xx
Ethanol
Isopropanol – IPA can be used as an alternative.
Cleaning sticks 00388764- xx X
Distilled water
Compressed air
ISOFLEX Topas 5051 50 ml 03078517- xx
Tools Item no. HMK
ESD wriststrap TYP.OK/WRS 00320279- xx
Allan key set 0.7 – 2 mm 00320265- xx X
Torque interchangeable blades 3mm hexagonal 03109522- xx X
Torque screwdriver ESD 0.1-0.6 Nm 00386132- xx X
Torque interchangeable blades 1.5 mm, hexagonal 00386135- xx X
Torque interchangeable blades 2 mm, hexagonal 00386136- xx X
Torx blade TX6 150 03076647- xx X
Press-fit blade for Phillips screwdriver size 1
Slotted screwdriver size 0
Philips inset PH1 03075861- xx
Wrench socket size 8
Tweezers 150 mm pointed, angled 00096487- xx
Maintenance Tasks for Pressure Control Valve
Overview 6.3.1 Checking/Cleaning the Pressure Control Valve
66 Maintenance Manual SIPLACE Placement Heads CPP, C&P20, Twin
6.2
6.2 Overview
Overview
6.3
6.3 Performing Maintenance Tasks
Performing Maintenance Tasks
6.3.1
6.3.1 Checking/Cleaning the Pressure Control Valve
Checking/Cleaning the Pressure Control Valve
Dismantling the Pressure Control Valve
Overview of pressure control valves
NOTICE!
Not on C&P20 P
This maintenance task must be performed on all Twin,
CPP, C&P20, C&P20 A and C&P20 M heads.
This maintenance task is not required for the C&P20 P.
The following tasks are described using the example of a
pressure control valve for a C&P20. The procedure is the
same for other types.
NOTICE
Tweezers
When replacing hoses, use the "tweezers, blunt 145 mm size 3 mm" [00376493-xx], if required.
CAUTION!
The housing, the board and the plunger are coordinated
with one another. Make sure that these are not confused
with parts from other pressure control valves.