00197551-01_MM_CPP-CP-Twin_Kunde_en.pdf - 第64页

Maintenance Tasks for Twin Performing Maintenance Tasks 5.4.2 Cleaning the Sleeve and Nozzl e Seat 64 Maintenance Manual SIPLACE Placement Heads CPP, C&P20, Twin 5.4.2 5 . 4 . 2 C le a n in g t h e S le e v e a n d N…

Maintenance Tasks for Twin

5.4.1 Replacing the Pressure Control Valve Preparatory Steps

Maintenance Manual SIPLACE Placement Heads CPP, C&P20, Twin 63

5.3

5.3 Preparatory Steps

Preparatory Steps

Preparing the Head Mount

► Assemble the head mount. For details, refer to the assembly instructions "Universal placement head

mounting rack" [DE+EN: 00196371-xx].

Preparing the Placement Head

► Dismantle the placement head and remove it from the placement machine. For details, refer to the

service manual for your machine.

Use the FHE function if possible.

► Fit the placement head onto the head mount.

5.4

5.4 Performing Maintenance Tasks

Performing Maintenance Tasks

5.4.1

5.4.1 Replacing the Pressure Control Valve

Replacing the Pressure Control Valve

Replacin g the Pres sure Contr ol Valve

Replacing the Pressure Control Valve

➢ The placement head must be removed for this maintenance task.

► Replace the pressure control valve. Read the service manual for your placement head for more in-

formation.

CAUTION

ESD

► Connect the assembly mount ESD connection to an ESD connection at the workplace.

► Always observe the ESD regulations described in the user manual.

NOTICE

Recommendation

We recommend that you have an additional pressure control valve available, so that this can

be easily replaced during head maintenance.

The actual cleaning of the removed pressure control valve can be performed later on.

► For more information about this, read section "6 Maintenance Tasks for Pressure Control

Valve" [ ➙ 65].

Maintenance Tasks for Twin

Performing Maintenance Tasks 5.4.2 Cleaning the Sleeve and Nozzle Seat

64 Maintenance Manual SIPLACE Placement Heads CPP, C&P20, Twin

5.4.2

5.4.2 Cleaning the Sleeve and Nozzle Seat

Cleaning the Sleeve and Nozzle Seat

5.4.3

5.4.3 Cleaning/Replacing the Additional Volume Filter

Cleaning/Replacing the Additional Volume Filter

Sleeve (Twin shown as example)

► Spray a small amount of Teflon oil on a lint-free cloth

and clean the sleeve and nozzle seat.

Alternatively you can also use a SIPLACE cleaning

cloth.

► Carefully blow through the nozzle.

► Repeat these steps on the second Twin module if

necessary.

Filter (example of Twin shown)

► Unscrew the lid (1) of the filter.

NOTICE!

If the filter is difficult to access, use the long-nosed pliers

to help you.

► Remove the filter (2).

► Clean the filter by blowing compressed air through it.

► Check the filter for damage.

► If it is damaged replace it with a new one.

► Screw the filter tight again.

► Repeat these steps on the second Twin module if

necessary.

Maintenance Tasks for Pressure Control Valve

Tools, Consumables, Spare and Wear Parts

Maintenance Manual SIPLACE Placement Heads CPP, C&P20, Twin 65

6 Maintenance Tasks for Pressure Control Valve

Maintenance Tasks for Pressure Control Valve

6.1

6.1 Tools, Consumables, Spare and Wear Parts

Tools, Consumables, Spare and Wear Parts

The following lists contain all necessary consumable materials, wear and spare parts plus tools for per-

forming maintenance tasks to the pressure control valve.

HMK = Included in Head Maintenance Kit