RX-8_SPE_EN.pdf - 第8页
4 3. System Confi guration ○ ： Equipped as standard ● ： Option - ： No setting Model name RX-8 RX-7R Remarks Basic configuration Attached heads P16S nozzle head － ○ P8 nozzle head － ○ P20 nozzle head ○ － Offset correction…
3
(8) Improvement of the operability
• The operation menu is changed completely: the favorites function and the history menu function
allow you to reach to the desired function by touching three buttons or less.
• The screen is composed of the easy-to-read and large color touch panel screen and the easy to
operate icon operating screen.
• The machine uses the easy-to-operate user interface excellent in the operability which supports
editing of recognition data.
(9) High operability
• The planet head can be attached/detached easily, and then serviced off-line.
• You can easily attach/detach a spare ATC on which nozzles are assigned.
(10) Conformance to laws and regulations
• The machine is marked with Europe CE directive.
• The machine conforms to Juki’s Green Purchasing Regulation.
4
3. System Configuration
○：Equipped as standard ●：Option -：No setting
Model name
RX-8
RX-7R
Remarks
Basic configuration
Attached heads
P16S nozzle head
－ ○
P8 nozzle head
－ ○
P20 nozzle head
○ －
Offset correction camera left (OCC-L)
○ ○
Offset correction camera right (OCC-R)
○ ○
Laser recognition unit
－ －
Component bottom side recognition camera
(equipped with a head)
○ ○
P20/P16S nozzle head only
Component side recognition camera (equipped with a head)
○ ○
P20/P16S nozzle head only
Component bottom side recognition camera
(To be attached on the main unit)
－ ○
RX-7R/P8 nozzle head only
Height Measurement System (HMS)
○ ○
Lighting unit for Solder recognition
－ －
Bad mark reader
○ ○
This is the function for recognizing a mark
with the OCC.
Power supply unit
Emergency stop button
○ ○
ATX power supply unit (equipped with the UPS function)
○ ○
Electric leakage breaker
● ●
I/O control unit
Motor control unit
X-Y control unit
Interior/exterior finish and equipment
Signal light (equipped with a buzzer)
○ ○
Mini signal light
－ －
Adjuster Rubber Sheet
－ －
Caster
－ －
Pneumatic device piping system
Air regulator
○ ○
Vacuum pump
○ ○
Main line filter
－ －
PWB transport unit
Placement station
○ ○
Dual-lane conveyor
－ ○
Front reference only
Auto PWB width adjustment unit
○ ○
Conveyor extension
－ －
Board stopper
○ ○
L
board supported (board length 350mm or more up to
420mm)
○ ○
* Right and left heads can be mounted at
the same time. However, there are two
restrictions; (1) BOC mark out of mounting
range cannot be recognized, (2) For the
transfer operation for L board, the
mechanical stopper of unit on downstream
side cannot be used
Longer-sized board (PWB length 510mm or less)
○ ○
Operation system
Liquid Crystal Display
○ ○
Keyboard with a trackball
－ －
SSD
○ ●
HDD
－ ○
LAN port Ethernet
○ ○
USB port (Front×2)
○ ○
We don't guarantee the function to all of
USB memories.
Rear-side operation unit
－ －
DVD/CD-ROM drive (USB)
－ －
5
Equipment
Feeder float sensor
○ ○
Automatic Tool Change unit (ATC)
○ ○
Large-sized component trash box
－ －
Flexible Calibration System (FCS)
○ ○
FCS adjustment jig
● ●
SOT direction inspection table
－ －
Component Verification System (CVS)
－ ●
P16S nozzle head only
Coplanarity
－ －
Fluxer: Type 2 (To be attached on the main unit)
－ －
Low load control
－ －
High-load control
－ －
Offset Placement After Solder Screen-printing
－ ●
ADVANCE KIT
－ ●
P16S head only / Retrofit only
Production support system
White list type anti-virus software
○ ○
Floor productivity improvement support system
Production support system
IS Lite
－ －
IS
－ －
JaNets
● ●
After Ver2.05 (RX-7R)
Production control system
IFS-NX
● ●
After Ver1.90 (RX-7R)
Flexline CAD
－ －
Component Database for a main unit
● ●
After Ver2.10 (RX-7R)
Component Database for a server
● ●
After Ver2.10 (RX-7R)
External Programming Unit (EPU)
－ －
Component supply device
Feeder bank for supporting an electric tape feeder
Designed for a feeder exchange trolley EF
(Equipped with a tape cutter and a trash box)
－ ●
Front left and right
You have to select a trolley type.
Designed for a feeder exchange trolley RF
(Equipped with a tape cutter and a trash box)
● ●
Fixed type
● ●
RF only
Component supply unit
Electric tape feeder EF series
－ ●
Electric tape feeder RF series
● ●
Stick feeder
－ －
Tray supply unit
MTC/MTS
－ －
Tray holder
－ －
Other supplied devices
Tape reel mounting base for an electric feeder (EF)
－ ●
Tape reel mounting base for an electric feeder (RF)
● ●
RF_ETFR ATTACHMENT － ●
Attach this component when electric
feeders are used by a feeder trolley (RF).
IC collection belt
－ －
Fluxer: Type 3
(To be attached on a bank/rear side only)
－ －
Rotary-type solder transfer device
(To be attached on a bank/front side only)
－ －
Power supply for setting up an electric bank
－ －