20121120111955_KY8030_2_Maintenance_Manual_Eng_ver1.pdf - 第33页

Maintenance Manual | 33 1.2.7. C ONVEYOR W ORK PCB S TOPPER Figure 1-8. Work PCB S topper 1. Cut  the  power/the  air  s upply  and  press  emergency  switch.  2. Open  the  Front  Door/Win dow  and  disass…

32 | KY-8030 2

3DSolderPasteInspectionSystem

Version 1.0

KOH YOUNG TECHNOLOGY INC.

4. Disassemble PCB Check Sensor from Sensor Bracket and assemble new PCB Check

SensortoSensorBracket.

5. FixPCBCheckSensorConnectorcheckingI/ONumber.

6. SupplypowerandcheckifthePCBCheckSensorisoperatingproperlyatI/Oscreen.

ÚNote:IfPCBisnotdetectedproperly,spintoadjustSensorandSensorBracketasthediagram.

Maintenance Manual | 33

1.2.7. CONVEYOR WORK PCB STOPPER

Figure 1-8. Work PCB Stopper

1. Cutthepower/theairsupplyandpressemergencyswitch.

2. OpentheFrontDoor/WindowanddisassembleRearCover/RightSideCover.

3. Disassembleair‐hosefromStopperAssembly.

4. Disassemble Stopper Assembly from Conveyor as the diagram and assemble new

StopperAssemblytoConveyor.

Stopper Tip

Stopper

Assembly

34 | KY-8030 2

3DSolderPasteInspectionSystem

Version 1.0

KOH YOUNG TECHNOLOGY INC.

5. CheckI/ONumberandassembletoStopperAssembly.

6. SupplypowerandcheckiftheStopperAssemblyisoperatingproperlyattheI/Oscreen.

ÚNote: Stopper Tip of Stopper Assemblywearsaway as PCBsare imported.It is recommended to

changeitinevery6monthsifwornoff.